无
无聊爱老婆
Unregistered / Unconfirmed
GUEST, unregistred user!
/*
** Copyright (C) 1999 - 2002 Albert L. Faber
**
** This program is free software;
you can redistribute it and/or modify
** it under the terms of the GNU General Public License as published by
** the Free Software Foundation;
either version 2 of the License, or
** (at your option) any later version.
**
** This program is distributed in the hope that it will be useful,
** but WITHOUT ANY WARRANTY;
without even the implied warranty of
** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
** GNU General Public License for more details.
**
** You should have received a copy of the GNU General Public License
** along with this program;
if not, write to the Free Software
** Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#ifndef CDRIP_INCLUDED
#define CDRIP_INCLUDED
#pragma pack(push,4)
#ifdef _WIN32
#define CCONV _stdcall
#endif
#undef DLLEXPORT
#define DLLEXPORT
#ifdef CDEX_DLL
// #define DLLEXPORT __declspec(dllexport)
#else
// #define DLLEXPORT __declspec(import)
#endif
#define CDEX_ERR LONG
#define CDEX_OK 0x00000000
#define CDEX_ERROR 0x00000001
#define CDEX_FILEOPEN_ERROR 0x00000002
#define CDEX_JITTER_ERROR 0x00000003
#define CDEX_RIPPING_DONE 0x00000004
#define CDEX_RIPPING_INPROGRESS 0x00000005
#define CDEX_FILEWRITE_ERROR 0x00000006
#define CDEX_OUTOFMEMORY 0x00000007
#define CDEX_NOCDROMDEVICES 0x00000008
#define CDEX_FAILEDTOLOADASPIDRIVERS 0x00000009
#define CDEX_NATIVEEASPINOTSUPPORTED 0x0000000A
#define CDEX_FAILEDTOGETASPISTATUS 0x0000000B
#define CDEX_NATIVEEASPISUPPORTEDNOTSELECTED 0x0000000C
#define HASTAT_OK 0x00 // Host adapter did not detect an error.
#define HASTAT_TIMEOUT 0x09 // The time allocated for a bus transaction ran out.
#define HASTAT_COMMAND_TIMEOUT 0x0B // SRB expired while waiting to be processed.
#define HASTAT_MESSAGE_REJECT 0x0D // MESSAGE REJECT received while processing SRB.
#define HASTAT_BUS_RESET 0x0E // A bus reset was detected.
#define HASTAT_PARITY_ERROR 0x0F // A parity error was detected.
#define HASTAT_REQUEST_SENSE_FAILED 0x10 // The adapter failed in issuing a Request Sense after a check condition was reported by the target device.
#define HASTAT_SEL_TO 0x11 // Selection of target timed out.
#define HASTAT_DO_DU 0x12 // Data overrun.
#define HASTAT_BUS_FREE 0x13 // Unexpected Bus Free.
#define HASTAT_PHASE_ERR 0x14 // Target Bus phase sequence failure.
#define STATUS_GOOD 0x00 // No target status.
#define STATUS_CHKCOND 0x02 // Check status (sense data is in SenseArea).
#define STATUS_BUSY 0x08 // Specified Target/LUN is busy.
#define STATUS_RESCONF 0x18 // Reservation conflict.
#define TRANSPLAYER_ASPI (0)
#define TRANSPLAYER_NTSCSI (1)
#define CDROMDATAFLAG 0x04
#define AUDIOTRKFLAG 0x10
#define CR_RIPPING_MODE_NORMAL ( 0 )
#define CR_RIPPING_MODE_PARANOIA ( 1 )
// forward class declaration
class CIni;
enum CDMEDIASTATUS
{
CDMEDIA_PRESENT = 0,
CDMEDIA_NOT_PRESENT,
CDMEDIA_NOT_PRESENT_TRAY_OPEN,
CDMEDIA_NOT_PRESENT_TRAY_CLOSED,
};
typedef struct CDSTATUSINFO_TAG
{
BYTE sk;
BYTE asc;
BYTE ascq;
BYTE ha_stat;
BYTE target_stat;
} CDSTATUSINFO;
enum DRIVETYPE
{
GENERIC=0,
TOSHIBA,
TOSHIBANEW,
IBM,
NEC,
DEC,
IMS,
KODAK,
RICOH,
HP,
PHILIPS,
PLASMON,
GRUNDIGCDR100IPW,
MITSUMICDR,
PLEXTOR,
SONY,
YAMAHA,
NRC,
IMSCDD5,
CUSTOMDRIVE,
NUMDRIVETYPES
};
enum READMETHOD
{
READMMC=0,
READ10,
READNEC,
READSONY,
READMMC2,
READMMC3,
READC1,
READC2,
READC3,
READMMC4,
NUMREADMETHODS
};
enum SETSPEED
{
SPEEDNONE=0,
SPEEDMMC,
SPEEDSONY,
SPEEDYAMAHA,
SPEEDTOSHIBA,
SPEEDPHILIPS,
SPEEDNEC,
NUMSPEEDMETHODS
};
enum ENDIAN
{
BIGENDIAN=0,
LITTLEENDIAN,
NUMENDIAN
};
enum ENABLEMODE
{
ENABLENONE=0,
ENABLESTD,
NUMENABLEMODES
};
typedef struct DRIVETABLE_TAG
{
DRIVETYPE DriveType;
READMETHOD ReadMethod;
SETSPEED SetSpeed;
ENDIAN Endian;
ENABLEMODE EnableMode;
LONG nDensity;
BOOL bAtapi;
} DRIVETABLE;
enum OUTPUTFORMAT
{
STEREO44100=0,
MONO44100,
STEREO22050,
MONO22050,
STEREO11025,
MONO11025,
NUMOUTPUTFORMATS
};
struct CDROMPARAMS
{
char lpszCDROMID[255]; // CD-ROM ID, must be unique to index settings in INI file
LONG nNumReadSectors; // Number of sector to read per burst
LONG nNumOverlapSectors; // Number of overlap sectors for jitter correction
LONG nNumCompareSectors; // Number of sector to compare for jitter correction
LONG nOffsetStart; // Fudge factor at start of ripping in sectors
LONG nOffsetend;
// Fudge factor at the end of ripping in sectors
LONG nSpeed; // CD-ROM speed factor 0 .. 32 x
LONG nSpinUpTime; // CD-ROM spin up time in seconds
BOOL bJitterCorrection; // Boolean indicates whether to use Jitter Correction
BOOL bSwapLefRightChannel; // Swap left and right channel ?
DRIVETABLE DriveTable; // Drive specific parameters
BYTE btTargetID; // SCSI target ID
BYTE btAdapterID; // SCSI Adapter ID
BYTE btLunID; // SCSI LUN ID
BOOL bAspiPosting; // When set ASPI posting is used, otherwhiese ASPI polling is used
INT nAspiRetries;
INT nAspiTimeOut;
BOOL bEnableMultiRead;
// Enables Multiple Read Verify Feature
BOOL bMultiReadFirstOnly;
// Only do
the multiple reads on the first block
INT nMultiReadCount;
// Number of times to reread and compare
BOOL bLockDuringRead;
// Number of times to reread and compare
INT nRippingMode;
INT nParanoiaMode;
BOOL bUseCDText; // Read CD Text info?
};
// Table of contents structure
struct TOCENTRY
{
DWORD dwStartSector; // Start sector of the track
BYTE btFlag; // Track flags (i.e. data or audio track)
BYTE btTrackNumber; // Track number
};
// Call init before anything else
DLLEXPORT CDEX_ERR CCONV CR_Init( LPCSTR strIniFname );
// Call DeIni when ripping library is no longer needed
DLLEXPORT CDEX_ERR CCONV CR_DeInit();
// Get the DLL version number
DLLEXPORT LONG CCONV CR_GetCDRipVersion();
// Get the number of detected CD-ROM drives
DLLEXPORT LONG CCONV CR_GetNumCDROM();
// Get the active CDROM drive index (0..GetNumCDROM()-1 )
DLLEXPORT LONG CCONV CR_GetActiveCDROM();
// Get the active CDROM drive (0..GetNumCDROM()-1 )
//DLLFUNCTION void CR_SetActiveCDROM(LONG nActiveDrive);
DLLEXPORT void CCONV CR_SetActiveCDROM(LONG nActiveDrive);
// Setlect the DRIVETYPE of the active drive
DLLEXPORT CDEX_ERR CCONV CR_SelectCDROMType( DRIVETYPE cdType );
// Get the Selected CDROM type
DLLEXPORT DRIVETYPE CCONV CR_GetCDROMType();
// Get the CDROM parameters of the active drive
DLLEXPORT CDEX_ERR CCONV CR_GetCDROMParameters( CDROMPARAMS* pParam);
// Set the CDROM parameters of the active drive
DLLEXPORT CDEX_ERR CCONV CR_SetCDROMParameters( CDROMPARAMS* pParam);
// Start ripping section, output is fetched to WriteBufferFunc
// Data is extracted from dwStartSector to dwEndSector
DLLEXPORT CDEX_ERR CCONV CR_OpenRipper( LONG* plBufferSize,LONG dwStartSector,LONG dwEndSector);
// Close the ripper, has to be called when the ripping process is completed (i.e 100%)
// Or it can be called to abort the current ripping section
DLLEXPORT CDEX_ERR CCONV CR_CloseRipper();
// Indicates how far the ripping process is right now
// Returns 100% when the ripping is completed
DLLEXPORT LONG CCONV CR_GetPercentCompleted();
// Returns the peak value of the ripped section (0..2^15)
DLLEXPORT LONG CCONV CR_GetPeakValue();
// Get number of Jitter Errors that have occured during the ripping
// This function must be called before CloseRipper is called !
DLLEXPORT LONG CCONV CR_GetNumberOfJitterErrors();
// Get the jitter position of the extracted track
DLLEXPORT LONG CCONV CR_GetJitterPosition();
// Rip a chunk from the CD, pbtStream contains the ripped data, pNumBytes the
// number of bytes that have been ripped and corrected for jitter (if enabled)
DLLEXPORT CDEX_ERR CCONV CR_RipChunk( BYTE* pbtStream,LONG* pNumBytes, BOOL&
bAbort );
// Load the CD-ROM settings from the file
DLLEXPORT CDEX_ERR CCONV CR_LoadSettings();
// Save the settings to a INI file
DLLEXPORT CDEX_ERR CCONV CR_SaveSettings();
// Normalize the stream (i.e. multiply by dScaleFactor)
DLLEXPORT void CCONV CR_NormalizeChunk(SHORT* pbsStream,LONG nNumSamples,DOUBLE dScaleFactor);
// Read the table of contents
DLLEXPORT CDEX_ERR CCONV CR_ReadToc();
// Read CD Text entry
DLLEXPORT CDEX_ERR CCONV CR_ReadCDText(BYTE* pbtBuffer,int nBufferSize,LPINT pnCDTextSize);
// Get the number of TOC entries, including the lead out
DLLEXPORT LONG CCONV CR_GetNumTocEntries();
// Get the TOC entry
DLLEXPORT TOCENTRY CCONV CR_GetTocEntry(LONG nTocEntry);
// Checks if the unit is ready (i.e. is the CD media present)
DLLEXPORT BOOL CCONV CR_IsUnitReady();
// Checks if the Media is loaded
DLLEXPORT CDEX_ERR CCONV CR_IsMediaLoaded( CDMEDIASTATUS&
IsMediaLoaded );
// Eject the CD, bEject=TRUE=>
the CD will be ejected, bEject=FALSE=>
the CD will be loaded
DLLEXPORT BOOL CCONV CR_EjectCD(BOOL bEject);
// Check if the CD is playing
DLLEXPORT BOOL CCONV CR_IsAudioPlaying();
// Play track
DLLEXPORT CDEX_ERR CCONV CR_PlayTrack(int nTrack);
// Stop Play track
DLLEXPORT CDEX_ERR CCONV CR_StopPlayTrack();
// Pause Play track
DLLEXPORT CDEX_ERR CCONV CR_PauseCD(BOOL bPause);
// Get debug information
DLLEXPORT CDSTATUSINFO CCONV CR_GetCDStatusInfo();
// Lock/unlock the CD Tray
DLLEXPORT void CCONV CR_LockCD( BOOL bLock );
DLLEXPORT void CCONV CR_GetSubChannelTrackInfo(int& nReadIndex,
int& nReadTrack,
DWORD& dwReadPos );
// Get status of audio playing
DLLEXPORT CDEX_ERR CCONV CR_GetPlayPosition(DWORD&
dwRelPos,DWORD&
dwAbsPos);
// Set the audio play position
DLLEXPORT CDEX_ERR CCONV CR_SetPlayPosition(DWORD dwAbsPos);
DLLEXPORT CDEX_ERR CCONV CR_PlaySection(LONG lStartSector,LONG lEndSector);
DLLEXPORT void CCONV CR_GetLastJitterErrorPosition(DWORD&
dwStartSector,DWORD&
dwEndSector);
DLLEXPORT DWORD CCONV CR_GetCurrentRipSector();
// Change transport layer, DLL has to be re-initialzed when changing the transport layer!
// 0 = ASPI drivers
// 1 = Native NT scsi drivers
DLLEXPORT VOID CCONV CR_SetTransportLayer( int nTransportLayer );
DLLEXPORT INT CCONV CR_GetTransportLayer( );
DLLEXPORT CDEX_ERR CCONV CR_ScanForC2Errors(
DWORD dwStartSector,
DWORD dwNumSectors,
DWORD& dwErrors,
DWORD* pdwErrorSectors );
DLLEXPORT CDEX_ERR CCONV CR_GetDetailedDriveInfo(
LPSTR lpszInfo,
DWORD dwInfoSize );
#pragma pack(pop)
#endif
** Copyright (C) 1999 - 2002 Albert L. Faber
**
** This program is free software;
you can redistribute it and/or modify
** it under the terms of the GNU General Public License as published by
** the Free Software Foundation;
either version 2 of the License, or
** (at your option) any later version.
**
** This program is distributed in the hope that it will be useful,
** but WITHOUT ANY WARRANTY;
without even the implied warranty of
** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
** GNU General Public License for more details.
**
** You should have received a copy of the GNU General Public License
** along with this program;
if not, write to the Free Software
** Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#ifndef CDRIP_INCLUDED
#define CDRIP_INCLUDED
#pragma pack(push,4)
#ifdef _WIN32
#define CCONV _stdcall
#endif
#undef DLLEXPORT
#define DLLEXPORT
#ifdef CDEX_DLL
// #define DLLEXPORT __declspec(dllexport)
#else
// #define DLLEXPORT __declspec(import)
#endif
#define CDEX_ERR LONG
#define CDEX_OK 0x00000000
#define CDEX_ERROR 0x00000001
#define CDEX_FILEOPEN_ERROR 0x00000002
#define CDEX_JITTER_ERROR 0x00000003
#define CDEX_RIPPING_DONE 0x00000004
#define CDEX_RIPPING_INPROGRESS 0x00000005
#define CDEX_FILEWRITE_ERROR 0x00000006
#define CDEX_OUTOFMEMORY 0x00000007
#define CDEX_NOCDROMDEVICES 0x00000008
#define CDEX_FAILEDTOLOADASPIDRIVERS 0x00000009
#define CDEX_NATIVEEASPINOTSUPPORTED 0x0000000A
#define CDEX_FAILEDTOGETASPISTATUS 0x0000000B
#define CDEX_NATIVEEASPISUPPORTEDNOTSELECTED 0x0000000C
#define HASTAT_OK 0x00 // Host adapter did not detect an error.
#define HASTAT_TIMEOUT 0x09 // The time allocated for a bus transaction ran out.
#define HASTAT_COMMAND_TIMEOUT 0x0B // SRB expired while waiting to be processed.
#define HASTAT_MESSAGE_REJECT 0x0D // MESSAGE REJECT received while processing SRB.
#define HASTAT_BUS_RESET 0x0E // A bus reset was detected.
#define HASTAT_PARITY_ERROR 0x0F // A parity error was detected.
#define HASTAT_REQUEST_SENSE_FAILED 0x10 // The adapter failed in issuing a Request Sense after a check condition was reported by the target device.
#define HASTAT_SEL_TO 0x11 // Selection of target timed out.
#define HASTAT_DO_DU 0x12 // Data overrun.
#define HASTAT_BUS_FREE 0x13 // Unexpected Bus Free.
#define HASTAT_PHASE_ERR 0x14 // Target Bus phase sequence failure.
#define STATUS_GOOD 0x00 // No target status.
#define STATUS_CHKCOND 0x02 // Check status (sense data is in SenseArea).
#define STATUS_BUSY 0x08 // Specified Target/LUN is busy.
#define STATUS_RESCONF 0x18 // Reservation conflict.
#define TRANSPLAYER_ASPI (0)
#define TRANSPLAYER_NTSCSI (1)
#define CDROMDATAFLAG 0x04
#define AUDIOTRKFLAG 0x10
#define CR_RIPPING_MODE_NORMAL ( 0 )
#define CR_RIPPING_MODE_PARANOIA ( 1 )
// forward class declaration
class CIni;
enum CDMEDIASTATUS
{
CDMEDIA_PRESENT = 0,
CDMEDIA_NOT_PRESENT,
CDMEDIA_NOT_PRESENT_TRAY_OPEN,
CDMEDIA_NOT_PRESENT_TRAY_CLOSED,
};
typedef struct CDSTATUSINFO_TAG
{
BYTE sk;
BYTE asc;
BYTE ascq;
BYTE ha_stat;
BYTE target_stat;
} CDSTATUSINFO;
enum DRIVETYPE
{
GENERIC=0,
TOSHIBA,
TOSHIBANEW,
IBM,
NEC,
DEC,
IMS,
KODAK,
RICOH,
HP,
PHILIPS,
PLASMON,
GRUNDIGCDR100IPW,
MITSUMICDR,
PLEXTOR,
SONY,
YAMAHA,
NRC,
IMSCDD5,
CUSTOMDRIVE,
NUMDRIVETYPES
};
enum READMETHOD
{
READMMC=0,
READ10,
READNEC,
READSONY,
READMMC2,
READMMC3,
READC1,
READC2,
READC3,
READMMC4,
NUMREADMETHODS
};
enum SETSPEED
{
SPEEDNONE=0,
SPEEDMMC,
SPEEDSONY,
SPEEDYAMAHA,
SPEEDTOSHIBA,
SPEEDPHILIPS,
SPEEDNEC,
NUMSPEEDMETHODS
};
enum ENDIAN
{
BIGENDIAN=0,
LITTLEENDIAN,
NUMENDIAN
};
enum ENABLEMODE
{
ENABLENONE=0,
ENABLESTD,
NUMENABLEMODES
};
typedef struct DRIVETABLE_TAG
{
DRIVETYPE DriveType;
READMETHOD ReadMethod;
SETSPEED SetSpeed;
ENDIAN Endian;
ENABLEMODE EnableMode;
LONG nDensity;
BOOL bAtapi;
} DRIVETABLE;
enum OUTPUTFORMAT
{
STEREO44100=0,
MONO44100,
STEREO22050,
MONO22050,
STEREO11025,
MONO11025,
NUMOUTPUTFORMATS
};
struct CDROMPARAMS
{
char lpszCDROMID[255]; // CD-ROM ID, must be unique to index settings in INI file
LONG nNumReadSectors; // Number of sector to read per burst
LONG nNumOverlapSectors; // Number of overlap sectors for jitter correction
LONG nNumCompareSectors; // Number of sector to compare for jitter correction
LONG nOffsetStart; // Fudge factor at start of ripping in sectors
LONG nOffsetend;
// Fudge factor at the end of ripping in sectors
LONG nSpeed; // CD-ROM speed factor 0 .. 32 x
LONG nSpinUpTime; // CD-ROM spin up time in seconds
BOOL bJitterCorrection; // Boolean indicates whether to use Jitter Correction
BOOL bSwapLefRightChannel; // Swap left and right channel ?
DRIVETABLE DriveTable; // Drive specific parameters
BYTE btTargetID; // SCSI target ID
BYTE btAdapterID; // SCSI Adapter ID
BYTE btLunID; // SCSI LUN ID
BOOL bAspiPosting; // When set ASPI posting is used, otherwhiese ASPI polling is used
INT nAspiRetries;
INT nAspiTimeOut;
BOOL bEnableMultiRead;
// Enables Multiple Read Verify Feature
BOOL bMultiReadFirstOnly;
// Only do
the multiple reads on the first block
INT nMultiReadCount;
// Number of times to reread and compare
BOOL bLockDuringRead;
// Number of times to reread and compare
INT nRippingMode;
INT nParanoiaMode;
BOOL bUseCDText; // Read CD Text info?
};
// Table of contents structure
struct TOCENTRY
{
DWORD dwStartSector; // Start sector of the track
BYTE btFlag; // Track flags (i.e. data or audio track)
BYTE btTrackNumber; // Track number
};
// Call init before anything else
DLLEXPORT CDEX_ERR CCONV CR_Init( LPCSTR strIniFname );
// Call DeIni when ripping library is no longer needed
DLLEXPORT CDEX_ERR CCONV CR_DeInit();
// Get the DLL version number
DLLEXPORT LONG CCONV CR_GetCDRipVersion();
// Get the number of detected CD-ROM drives
DLLEXPORT LONG CCONV CR_GetNumCDROM();
// Get the active CDROM drive index (0..GetNumCDROM()-1 )
DLLEXPORT LONG CCONV CR_GetActiveCDROM();
// Get the active CDROM drive (0..GetNumCDROM()-1 )
//DLLFUNCTION void CR_SetActiveCDROM(LONG nActiveDrive);
DLLEXPORT void CCONV CR_SetActiveCDROM(LONG nActiveDrive);
// Setlect the DRIVETYPE of the active drive
DLLEXPORT CDEX_ERR CCONV CR_SelectCDROMType( DRIVETYPE cdType );
// Get the Selected CDROM type
DLLEXPORT DRIVETYPE CCONV CR_GetCDROMType();
// Get the CDROM parameters of the active drive
DLLEXPORT CDEX_ERR CCONV CR_GetCDROMParameters( CDROMPARAMS* pParam);
// Set the CDROM parameters of the active drive
DLLEXPORT CDEX_ERR CCONV CR_SetCDROMParameters( CDROMPARAMS* pParam);
// Start ripping section, output is fetched to WriteBufferFunc
// Data is extracted from dwStartSector to dwEndSector
DLLEXPORT CDEX_ERR CCONV CR_OpenRipper( LONG* plBufferSize,LONG dwStartSector,LONG dwEndSector);
// Close the ripper, has to be called when the ripping process is completed (i.e 100%)
// Or it can be called to abort the current ripping section
DLLEXPORT CDEX_ERR CCONV CR_CloseRipper();
// Indicates how far the ripping process is right now
// Returns 100% when the ripping is completed
DLLEXPORT LONG CCONV CR_GetPercentCompleted();
// Returns the peak value of the ripped section (0..2^15)
DLLEXPORT LONG CCONV CR_GetPeakValue();
// Get number of Jitter Errors that have occured during the ripping
// This function must be called before CloseRipper is called !
DLLEXPORT LONG CCONV CR_GetNumberOfJitterErrors();
// Get the jitter position of the extracted track
DLLEXPORT LONG CCONV CR_GetJitterPosition();
// Rip a chunk from the CD, pbtStream contains the ripped data, pNumBytes the
// number of bytes that have been ripped and corrected for jitter (if enabled)
DLLEXPORT CDEX_ERR CCONV CR_RipChunk( BYTE* pbtStream,LONG* pNumBytes, BOOL&
bAbort );
// Load the CD-ROM settings from the file
DLLEXPORT CDEX_ERR CCONV CR_LoadSettings();
// Save the settings to a INI file
DLLEXPORT CDEX_ERR CCONV CR_SaveSettings();
// Normalize the stream (i.e. multiply by dScaleFactor)
DLLEXPORT void CCONV CR_NormalizeChunk(SHORT* pbsStream,LONG nNumSamples,DOUBLE dScaleFactor);
// Read the table of contents
DLLEXPORT CDEX_ERR CCONV CR_ReadToc();
// Read CD Text entry
DLLEXPORT CDEX_ERR CCONV CR_ReadCDText(BYTE* pbtBuffer,int nBufferSize,LPINT pnCDTextSize);
// Get the number of TOC entries, including the lead out
DLLEXPORT LONG CCONV CR_GetNumTocEntries();
// Get the TOC entry
DLLEXPORT TOCENTRY CCONV CR_GetTocEntry(LONG nTocEntry);
// Checks if the unit is ready (i.e. is the CD media present)
DLLEXPORT BOOL CCONV CR_IsUnitReady();
// Checks if the Media is loaded
DLLEXPORT CDEX_ERR CCONV CR_IsMediaLoaded( CDMEDIASTATUS&
IsMediaLoaded );
// Eject the CD, bEject=TRUE=>
the CD will be ejected, bEject=FALSE=>
the CD will be loaded
DLLEXPORT BOOL CCONV CR_EjectCD(BOOL bEject);
// Check if the CD is playing
DLLEXPORT BOOL CCONV CR_IsAudioPlaying();
// Play track
DLLEXPORT CDEX_ERR CCONV CR_PlayTrack(int nTrack);
// Stop Play track
DLLEXPORT CDEX_ERR CCONV CR_StopPlayTrack();
// Pause Play track
DLLEXPORT CDEX_ERR CCONV CR_PauseCD(BOOL bPause);
// Get debug information
DLLEXPORT CDSTATUSINFO CCONV CR_GetCDStatusInfo();
// Lock/unlock the CD Tray
DLLEXPORT void CCONV CR_LockCD( BOOL bLock );
DLLEXPORT void CCONV CR_GetSubChannelTrackInfo(int& nReadIndex,
int& nReadTrack,
DWORD& dwReadPos );
// Get status of audio playing
DLLEXPORT CDEX_ERR CCONV CR_GetPlayPosition(DWORD&
dwRelPos,DWORD&
dwAbsPos);
// Set the audio play position
DLLEXPORT CDEX_ERR CCONV CR_SetPlayPosition(DWORD dwAbsPos);
DLLEXPORT CDEX_ERR CCONV CR_PlaySection(LONG lStartSector,LONG lEndSector);
DLLEXPORT void CCONV CR_GetLastJitterErrorPosition(DWORD&
dwStartSector,DWORD&
dwEndSector);
DLLEXPORT DWORD CCONV CR_GetCurrentRipSector();
// Change transport layer, DLL has to be re-initialzed when changing the transport layer!
// 0 = ASPI drivers
// 1 = Native NT scsi drivers
DLLEXPORT VOID CCONV CR_SetTransportLayer( int nTransportLayer );
DLLEXPORT INT CCONV CR_GetTransportLayer( );
DLLEXPORT CDEX_ERR CCONV CR_ScanForC2Errors(
DWORD dwStartSector,
DWORD dwNumSectors,
DWORD& dwErrors,
DWORD* pdwErrorSectors );
DLLEXPORT CDEX_ERR CCONV CR_GetDetailedDriveInfo(
LPSTR lpszInfo,
DWORD dwInfoSize );
#pragma pack(pop)
#endif
RIVETYPE;