创建一个位图

I

import

Unregistered / Unconfirmed
GUEST, unregistred user!
创建256色位图的调色板时,要先定义版本号及色彩数,然后对于每一个调色板 的Entry,赋予R,G,B值。在位图的数据中,只需给出对应调色板的索引值,从0
到255。
看看下面的例子。
procedure TForm1.Button1Click(Sender: TObject);
var
x,y : integer;
BitMap : TBitMap;
lplogpal:pMaxLogPalette;//pointer of TMaxLogPalette
p:pByteArray;
begin
BitMap := TBitMap.create;
Bitmap.Width:=256;
Bitmap.Height:=256;
Bitmap.PixelFormat:= pf8bit;
GetMem(lpLogPal,sizeof(TLOGPALETTE) + ((255) * sizeof(TPALETTEENTRY)));
lpLogPal.palVersion := $0300;
lpLogPal.palNumEntries := 256;
for x := 0 to 255 do
begin
lpLogPal.palPalEntry[x].peRed := x;
lpLogPal.palPalEntry[x].peGreen := x;
lpLogPal.palPalEntry[x].peBlue := x;
end;
Bitmap.Palette := CreatePalette(pLogPalette(lpLogPal)^);
FreeMem(lpLogPal,sizeof(TLOGPALETTE) + ((255) * sizeof(TPALETTEENTRY)));
for y := 0 to BitMap.Height -1 do
begin
P := BitMap.ScanLine[y];
for x := 0 to BitMap.Width -1 do
P[x] := Byte(x*y);
end;
canvas.draw(0,0,BitMap);//form.canvas, just for a look:)
end;
**********************
创建位图
 
One way to create a bitmap from a pixel array is to use the
Windows API function CreateDiBitmap(). This will allow you to
use one of many device independent bitmap formats that Windows
uses to store your pixel data. This has the advantage that it
will work on any Windows system, without knowing the pixel
format that the device uses ahead of time. Properly executed by
optimizing your code, theCreateDiBitmap function can be quite
fast as well. The following example creates a 256 color bitmap
from a pixel array. The bitmap fades from white to black using
256 gray shades. Note that normally, Windows reserves the first
and last ten colors for use as system colors, so you may only
get a maximum of 236 gray shades.
{$IFNDEF WIN32}
type
{Used for pointer math under Win16}
PPtrRec = ^TPtrRec;
TPtrRec = record
Lo: Word;
Hi: Word;
end;
{$ENDIF}
{Used for huge pointer math}
function GetBigPointer(lp: pointer;
Offset: Longint): Pointer;
begin
{$IFDEF WIN32}
GetBigPointer := @PByteArray(lp)^[Offset];
{$ELSE}
Offset := Offset + TPtrRec(lp).Lo;
GetBigPointer := Ptr(TPtrRec(lp).Hi + TPtrRec(Offset).Hi *
SelectorInc,
TPtrRec(Offset).Lo);
{$ENDIF}
end;
procedure TForm1.Button1Click(Sender: TObject);
var
hPixelBuffer : THandle; {Handle to the pixel buffer}
lpPixelBuffer : pointer; {pointer to the pixel buffer}
lpPalBuffer : PLogPalette; {The palette buffer}
lpBitmapInfo : PBitmapInfo; {The bitmap info header}
BitmapInfoSize : longint; {Size of the bitmap info header}
BitmapSize : longint; {Size of the pixel array}
PaletteSize : integer; {Size of the palette buffer}
i : longint; {loop variable}
j : longint; {loop variable}
OldPal : hPalette; {temp palette}
hPal : hPalette; {handle to our palette}
hBm : hBitmap; {handle to our bitmap}
Bm : TBitmap; {temporary TBitmap}
Dc : hdc; {used to convert the DOB to a DDB}
IsPaletteDevice : bool;
begin
Application.ProcessMessages;
{If range checking is on - turn it off for now}
{we will remember if range checking was on by defining}
{a define called CKRANGE if range checking is on.}
{We do this to access array members past the arrays}
{defined index range without causing a range check}
{error at runtime. To satisfy the compiler, we must}
{also access the indexes with a variable. ie: if we}
{have an array defined as a: array[0..0] of byte,}
{and an integer i, we can now access a[3] by setting}
{i := 3; and then accessing a without error}
{$IFOPT R+}
{$DEFINE CKRANGE}
{$R-}
{$ENDIF}
{Lets check to see if this is a palette device - if so, then}
{we must do palette handling for a successful operation.}
{Get the screen's dc to use since memory dc's are not reliable}
dc := GetDc(0);
IsPaletteDevice :=
GetDeviceCaps(dc, RASTERCAPS) and RC_PALETTE = RC_PALETTE;
{Give back the screen dc}
dc := ReleaseDc(0, dc);
{The bitmap info size must be the size of the BitmapInfo}
{plus the size of the color table - one color table entry}
{is already defined in TBitmapInfo}
BitmapInfoSize := sizeof(TBitmapInfo) + (sizeof(TRGBQUAD) * 255);
{The bitmap size must be the width of the bitmap rounded}
{up to the nearest 32 bit boundary}
BitmapSize := (sizeof(byte) * 256) * 256;
{The size of the palette must be the size of a TLogPalette}
{plus the number of color palette entries - 1, since there}
{is already one palette entry defined in TLogPalette}
if IsPaletteDevice then
PaletteSize := sizeof(TLogPalette) + (sizeof(TPaletteEntry) * 255);
{Get the memory for the BitmapInfo, the PixelBuffer, and the Palette}
GetMem(lpBitmapInfo, BitmapInfoSize);
hPixelBuffer := GlobalAlloc(GHND, BitmapSize);
lpPixelBuffer := GlobalLock(hPixelBuffer);
if IsPaletteDevice then
GetMem(lpPalBuffer, PaletteSize);
{Zero out the BitmapInfo, the PixelBuffer, and the Palette}
FillChar(lpBitmapInfo^, BitmapInfoSize, #0);
FillChar(lpPixelBuffer^, BitmapSize, #0);
if IsPaletteDevice then
FillChar(lpPalBuffer^, PaletteSize, #0);
{Fill in the BitmapInfo structure}
lpBitmapInfo^.bmiHeader.biSize := sizeof(TBitmapInfoHeader);
lpBitmapInfo^.bmiHeader.biWidth := 256;
lpBitmapInfo^.bmiHeader.biHeight := 256;
lpBitmapInfo^.bmiHeader.biPlanes := 1;
lpBitmapInfo^.bmiHeader.biBitCount := 8;
lpBitmapInfo^.bmiHeader.biCompression := BI_RGB;
lpBitmapInfo^.bmiHeader.biSizeImage := BitmapSize;
lpBitmapInfo^.bmiHeader.biXPelsPerMeter := 0;
lpBitmapInfo^.bmiHeader.biYPelsPerMeter := 0;
lpBitmapInfo^.bmiHeader.biClrUsed := 256;
lpBitmapInfo^.bmiHeader.biClrImportant := 256;
{Fill in the BitmapInfo color table with gray shades: black to white}
for i := 0 to 255 do
begin
lpBitmapInfo^.bmiColors.rgbRed := i;
lpBitmapInfo^.bmiColors.rgbGreen := i;
lpBitmapInfo^.bmiColors.rgbBlue := i;
end;
{Fill in the pixel buffer array with shades: black to white}
{In a 256 color bitmap the color is an index into the color table}
for i := 0 to 255 do
for j := 0 to 255 do
Byte(GetBigPointer(lpPixelBuffer, i + (j * 256))^) := j;
{Fill in the palette structure}
if IsPaletteDevice then
begin
lpPalBuffer^.palVersion := $300;
lpPalBuffer^.palNumEntries := 256;
{Fill in the palette structure color table}
for i := 0 to 255 do
begin
lpPalBuffer^.PalPalEntry.peRed := i;
lpPalBuffer^.PalPalEntry.peGreen := i;
lpPalBuffer^.PalPalEntry.peBlue := i;
end;
{Create a palette}
hPal := CreatePalette(lpPalBuffer^);
end;
{Get the screen's dc to use for the conversion since}
{memory dc's are not reliable to use for conversions}
dc := GetDc(0);
if IsPaletteDevice then
begin
{If we are using a palette, it must be}
{selected into the dc during the conversion}
OldPal := SelectPalette(dc, hPal, TRUE);
{Realize the palette}
RealizePalette(dc);
end;
{Do the conversion}
hBm := CreateDiBitmap(dc,
lpBitmapInfo^.bmiHeader,
CBM_INIT,
pChar(lpPixelBuffer),
lpBitmapInfo^,
DIB_RGB_COLORS);
if IsPaletteDevice then
begin
{Select the old palette back in}
SelectPalette(dc, OldPal, TRUE);
{Realize the old palette}
RealizePalette(dc);
end;
{Give back the screen dc}
dc := ReleaseDc(0, dc);
{Create a temporory TBitmap}
bm := TBitmap.Create;
{Free up the memory we used}
if IsPaletteDevice then
FreeMem(lpPalBuffer, PaletteSize);
GlobalUnlock(hPixelBuffer);
GlobalFree(hPixelBuffer);
FreeMem(lpBitmapInfo, BitmapInfoSize);
{Assign the palette}
if IsPaletteDevice then
bm.Palette := hPal;
{Assign the handle}
bm.Handle := hBm;
{Size Image1}
Image1.Width := 256;
Image1.Height := 256;
{Assign the bitmap}
Image1.Picture.Bitmap := bm;
SelectPalette(Image1.Picture.Bitmap.Canvas.Handle,
Image1.Picture.Bitmap.Palette,
false);
{Turn range checking back on if it was on when we started}
{$IFDEF CKRANGE}
{$UNDEF CKRANGE}
{$R+}
{$ENDIF}
end;
 

Similar threads

I
回复
0
查看
560
import
I
I
回复
0
查看
468
import
I
I
回复
0
查看
506
import
I
I
回复
0
查看
450
import
I
顶部