这篇文章也许对2000下想要自定义纸张大小的人有帮助(0分)

  • 主题发起人 主题发起人 mickey4
  • 开始时间 开始时间
M

mickey4

Unregistered / Unconfirmed
GUEST, unregistred user!
[h1]Microsoft Knowledge Base Article - Q282474
HOWTO: Print Using Custom Page Sizes on Windows NT and Windows 2000[/h1]
The information in this article applies to:
Microsoft Visual Basic Professional Edition for Windows 6.0
Microsoft Visual Basic Enterprise Edition for Windows 6.0
Summary
Microsoft Windows 95, Windows 98, and Windows Millennium Edition (Me) are flexible on custom, user-defined page sizes. However, on systems that are running Windows NT and Windows 2000, you must define all page sizes as a form before you can use them. This article describes how to print custom page sizes on Windows NT and Windows 2000 and includes a code sample that demonstrates how to add, select, and delete custom forms.
NOTE: Because of the behavior of the Visual Basic 5.0 Printer object, the changes to the DEVMODE that are made by the call to ResetDC has no effect. Thus, the code sample in this articledo
es not work from Visual Basic 5.0.
This article is divided into the following sections:

DEVMODE Members That Define or Select Page Size
How to Programmatically Select a Form
Form Sources and Functions
Steps to Add a Local Print Driver for a Network Printer
Step-by-Step Example
More Information
DEVMODE Members That Define or Select Page Size
Printer drivers store their default settings in a structure called the DEVMODE. When you define or select a page size, four members of this structure may be involved:

dmPaperSize
dmPaperLength
dmPaperWidth
dmFormName
The dmPaperLength and dmPaperWidth members contain values on all operating systems, but they can only be used to select or define a size on systems that are running Windows 95, Windows 98, or Windows Me. The dmFormName member is only valid for systems that are running Windows NT or Windows 2000. The dmPaperSize member can be used on any 32-bit Windows operating system, as long as the value that is assigned to it corresponds to a size or form that is defined on that system.
Thus, on systems that are running Windows 95, Windows 98, or Windows Me, you can define custom page sizes by height (length) and width or by a predefined paper size. Windows NT-based or Windows 2000-based systems only use defined forms for page sizes, which you can select in one of two ways: set dmFormName or assign a valid "constant" value to dmPaperSize.
To use a particular paper size on Windows NT or Windows 2000, you must define a form for it. The Visual Basic Printer object has PageSize, Height, and Width properties that expose the dmPaperSize, dmPaperLength, and dmPaperWidth members of the DEVMODE. However, the Printer objectdo
es not expose a way to select a form by name, nordo
es it have a method to add a custom form at run time. We must use the Win32 application programming interface (API) to create a custom form and/or select a form by name.
How to Programmatically Select a Form
This article uses the EnumForms basic process to list all forms that are supported for the current printer and to check the height and width of each form. If the specified size is found, it is selected. If it is not found, the code adds the form and then
selects it.
There are three ways to programmatically select a form:
Retrieve the printer's DEVMODE structure, set the dmFormName member, and use the ResetDC function to set this form as the current form for the Device Context (DC) of the printer. When this form is selected for the DC, it is only selected for the calling process anddo
es not change the driver's default setting. Thisdo
es not require any special permissions. This method is preferred for applications that change a printer's settings.
Call the SetForm function to change the default form for the printer driver. This method requires full access permissions to the driver. When the default form is changed, it affects every application that uses this driver to print. If this is a network printer, most usersdo
not have the necessary permissions to make this call.
Assign the system-defined value for the custom form to Printer.PaperSize.
Only the first method is demonstrated in this article's sample code;
the sampledo
es not demonstrate the call to SetForm or the value assignment to Printer.PaperSize. The sample captures the system-assigned value of the new custom form by returning the value of its ordinal position in the list that EnumForms returns. Note that this only works for custom forms. Predefined forms have constant values assigned to them thatdo
not correspond to their ordinal position in this list.
When you use the AddForm function to add your custom form, the form is given its own number, if available, which then
remains consistent across all printers that use the form. In this case, the form is defined and given a "constant" value for the current system. You can then
assign this value to Printer.PaperSize to select it. However, because the number assignment is simply one more than the number of forms that is listed for the current printer when the form was added, this number may not be available because a predefined form is already using that number. Therefore, it is not recommended that you use this value to select a form, and this value is not demonstrated here. If you use this number assignment, and the value for it is unavailable, it will either select the wrong form or raise run-time error 380: "Invalid Property Value."
Form Sources and Functions
Most forms are defined by the operating system and are available to all local printers. However, forms for network printers are defined on the printer server. Some forms may be defined specifically for a given printer driver and only appear in the list for that driver. Another source for forms is custom-defined or user-defined forms, which can be created manually or through code and are available to all local printers on the system. Both printer-specific and user-defined forms are stored in the registry.
The sample in this article uses a few function calls that are related to forms. Briefly, the key functions are as follows:
Function Description
EnumForms Returns information about all of the forms that are supported for the current printer.
AddForm Adds a custom form to the system. The data on this form is stored in the registry. Thus, custom forms are available for all printers, not just the printer that was current when the form was added. The numeric value that the system assigns to this form is simply one number higher than the number of forms that EnumForms returns for the current printer. You must have full rights to the driver to call this function. If you cannot add a form manually, this function call also fails for you. For this reason, you usually cannot use this function on network printers.
DeleteForm Removes a custom form. However, this functiondo
es not delete the standard forms that the operating system defines and returns error code 87 if this is attempted. This function also requires the same rights as AddForm.

Although the sampledo
es not use the following functions, itdo
es include the Declares for these functions:
Function Description
GetForm Retrieves information about a specific form.
SetForm Sets the default form information for the specified printer. This function requires full rights, just as changing any printer driver settingdo
es.

It must be emphasized that some of these functions require Full Control permissions on the printer. Therefore, the SetForm, AddForm, and DeleteForm functions almost never work for printers that are installed as "network printers." This is because the drivers for network printers are not installed locally but reside on the printer server, and your User account is unlikely to have Administrator rights on the printer server. This differs from systems that are running Windows 95, Windows 98, or Windows Me, in which all printer drivers (even network printers) are always installed locally. However, you can install network printers as local printers in Windows NT or Windows 2000 and set the Port to the printer queue. then
you can use these functions to make changes without affecting other users who share the printer.
Steps to Add a Local Printer Driver for a Network Printer
On the Start menu, point to Settings, and then
click Printers.do
uble-click Add Printer to start the Add Printer Wizard.
When prompted, make sure that you click Local printer or My Computer and NOT Network printer. Although you will connect to a network printer, you want to use a driver on My Computer. Click Next to continue.
On Windows NT, click Add Port. On Windows 2000, click Create a new port.
In the drop-down list box, click Local Port. On Windows NT, click New Port. On Windows 2000, click Next, and you are prompted for a Port Name.
Type the location of the printer on the network. For example:
//printserver/printername
where you use the exact path name to the printer.
Click OK, and complete the wizard.
If you change the printer properties for the active printer, you still affect all applications that use that printer, but only for the local system.
IMPORTANT When you use custom page sizes, the behavior differs between Laser or Ink Jet printers anddo
t Matrix or impact printers. Obviously, no printer accepts a page size that is wider than it can physically accommodate. But printers that use continuous feed paper can be flexible on page sizes because they print one line at a time. Alternately, Laser and Ink Jet printers print one page at a time. Thus, for example, when you print to ado
t Matrix printer (which uses continuous feed paper), you can easily see the page length during a form feed because the printer advances to the place where it expects the top of the next page to start, regardless of the physical size of the paper that it is using. On Laser and Ink Jet printers, a form feed always ejects a full physical page regardless of the page size it expects. Also, on most Laser printers, the display reads "Load Custom" (or similar) when you ask the printer to print on a user-defined page size.
Step-by-Step Example
Set a local printer as the default printer. Todo
this, follow these steps:
On the Start menu, point to Settings, and then
click Printers.
Right-click the icon for a local printer, and then
click Set as default.
Start a new Standard EXE project in Visual Basic. Form1 is created by default.
Add three CommandButtons and a ListBox control to Form1.
Paste the following code into the module of Form1:
Option Explicit
Private Sub Command1_Click()
Dim FormName As String
FormName = "MyCustomForm" ' Use special, user-defined form.
UseForm FormName
End Sub
Private Sub Command2_Click()
Dim FormName As String
' Get FormName from the ListBox.
On Error GoTo ListBoxERR ' Trap for no selection.
FormName = Mid(List1.Text, 1, InStr(1, List1.Text, " -") - 1)
On Error GoTo 0 ' Turn off Error trap.
UseForm FormName
Exit Sub
ListBoxERR:
MsgBox "Select a printer from the ListBox before using this option.", _
vbExclamation
End Sub
Private Sub Command3_Click()
Dim RetVal As Long
Dim PrinterHandle As Long ' Handle to printer
Dim PrinterName As String
Dim FormName As String
Dim Continue As Long
' Delete form that is selected in ListBox.
PrinterName = Printer.DeviceName ' Current printer
If OpenPrinter(PrinterName, PrinterHandle, 0&) then

On Error GoTo ListBoxERR ' Trap for no selection.
FormName = Mid(List1.Text, 1, InStr(1, List1.Text, " -") - 1)
On Error GoTo 0 ' Turn off Error trap.

Continue = MsgBox("Are you sure you want to permanently remove " &
_
FormName &
" from " &
PrinterName &
"?", vbYesNo)
If Continue = vbYes then
RetVal = DeleteForm(PrinterHandle, FormName &
Chr(0))
If RetVal <> 0 then
' DeleteForm succeeded.
List1.Clear ' Reflect the deletion in the ListBox.
Form_Load ' Rebuild the list.
MsgBox FormName &amp;
" deleted!", vbInformation, "Success!"
else
MsgBox FormName &amp;
" not deleted!" &amp;
vbCrLf &amp;
vbCrLf &amp;
_
"Error code: " &amp;
Err.LastDllError, vbInformation, "Failure!"
End If
End If
ClosePrinter (PrinterHandle)
End If
Exit Sub
ListBoxERR:
MsgBox "Select a printer from the ListBox before using this option.", _
vbExclamation
ClosePrinter (PrinterHandle)
End Sub
Private Sub Form_Load()
Dim NumForms As Long, I As Long
Dim FI1 As FORM_INFO_1
Dim aFI1() As FORM_INFO_1 ' Working FI1 array
Dim Temp() As Byte ' Temp FI1 array
Dim BytesNeeded As Long
Dim PrinterName As String ' Current printer
Dim PrinterHandle As Long ' Handle to printer
Dim FormItem As String ' For ListBox
Dim RetVal As Long
Dim FormSize As SIZEL ' Size of desired form
PrinterName = Printer.DeviceName ' Current printer
If OpenPrinter(PrinterName, PrinterHandle, 0&amp;) then
With FormSize ' Desired page size
.cx = 214000
.cy = 216000
End With
ReDim aFI1(1)
RetVal = EnumForms(PrinterHandle, 1, aFI1(0), 0&amp;, BytesNeeded, _
NumForms)
ReDim Temp(BytesNeeded)
ReDim aFI1(BytesNeeded / Len(FI1))
RetVal = EnumForms(PrinterHandle, 1, Temp(0), BytesNeeded, _
BytesNeeded, NumForms)
Call CopyMemory(aFI1(0), Temp(0), BytesNeeded)
For I = 0 To NumForms - 1
With aFI1(I)
' List name and size including the count (index).
FormItem = PtrCtoVbString(.pName) &amp;
" - " &amp;
.Size.cx / 1000 &amp;
_
" mm X " &amp;
.Size.cy / 1000 &amp;
" mm (" &amp;
I + 1 &amp;
")"
List1.AddItem FormItem
End With
Next I
ClosePrinter (PrinterHandle)
End If
End Sub
Private Sub UseForm(FormName As String)
Dim RetVal As Integer
RetVal = SelectForm(FormName, Me.hwnd)
Select Case RetVal
Case FORM_NOT_SELECTED ' 0
' Selection failed!
MsgBox "Unable to retrieve From name", vbExclamation, _
"Operation halted!"
Case FORM_SELECTED ' 1
' Selection succeeded!
PrintTest ' Comment this line to avoid printing
Case FORM_ADDED ' 2
' Form added and selected.
List1.Clear ' Reflect the addition in the ListBox
Form_Load ' by rebuilding the list.
End Select
End Sub
From the Project menu, add a new Module, Module1.
Paste the following code into Module1:
Option Explicit
Public Declare Function EnumForms Lib "winspool.drv" Alias "EnumFormsA" _
(ByVal hPrinter As Long, ByVal Level As Long, ByRef pForm As Any, _
ByVal cbBuf As Long, ByRef pcbNeeded As Long, _
ByRef pcReturned As Long) As Long
Public Declare Function AddForm Lib "winspool.drv" Alias "AddFormA" _
(ByVal hPrinter As Long, ByVal Level As Long, pForm As Byte) As Long
Public Declare Function DeleteForm Lib "winspool.drv" Alias "DeleteFormA" _
(ByVal hPrinter As Long, ByVal pFormName As String) As Long

Public Declare Function OpenPrinter Lib "winspool.drv" _
Alias "OpenPrinterA" (ByVal pPrinterName As String, _
phPrinter As Long, ByVal pDefault As Long) As Long
Public Declare Function ClosePrinter Lib "winspool.drv" _
(ByVal hPrinter As Long) As Long
Public Declare Functiondo
cumentProperties Lib "winspool.drv" _
Alias "DocumentPropertiesA" (ByVal hwnd As Long, _
ByVal hPrinter As Long, ByVal pDeviceName As String, _
pDevModeOutput As Any, pDevModeInput As Any, ByVal fMode As Long) _
As Long
Public Declare Function ResetDC Lib "gdi32" Alias "ResetDCA" _
(ByVal hdc As Long, lpInitData As Any) As Long
Public Declare Sub CopyMemory Lib "KERNEL32" Alias "RtlMoveMemory" _
(hpvDest As Any, hpvSource As Any, ByVal cbCopy As Long)
Public Declare Function lstrcpy Lib "KERNEL32" Alias "lstrcpyA" _
(ByVal lpString1 As String, ByRef lpString2 As Long) As Long

' Optional functions not used in this sample, but may be useful.
Public Declare Function GetForm Lib "winspool.drv" Alias "GetFormA" _
(ByVal hPrinter As Long, ByVal pFormName As String, _
ByVal Level As Long, pForm As Byte, ByVal cbBuf As Long, _
pcbNeeded As Long) As Long

Public Declare Function SetForm Lib "winspool.drv" Alias "SetFormA" _
(ByVal hPrinter As Long, ByVal pFormName As String, _
ByVal Level As Long, pForm As Byte) As Long
' Constants for DEVMODE
Public Const CCHFORMNAME = 32
Public Const CCHDEVICENAME = 32
Public Const DM_FORMNAME As Long = &amp;H10000
Public Const DM_ORIENTATION = &amp;H1&amp;
' Constants for PRINTER_DEFAULTS.DesiredAccess
Public Const PRINTER_ACCESS_ADMINISTER = &amp;H4
Public Const PRINTER_ACCESS_USE = &amp;H8
Public Const STANDARD_RIGHTS_REQUIRED = &amp;HF0000
Public Const PRINTER_ALL_ACCESS = (STANDARD_RIGHTS_REQUIRED Or _
PRINTER_ACCESS_ADMINISTER Or PRINTER_ACCESS_USE)

' Constants fordo
cumentProperties() call
Public Const DM_MODIFY = 8
Public Const DM_IN_BUFFER = DM_MODIFY
Public Const DM_COPY = 2
Public Const DM_OUT_BUFFER = DM_COPY
' Custom constants for this sample's SelectForm function
Public Const FORM_NOT_SELECTED = 0
Public Const FORM_SELECTED = 1
Public Const FORM_ADDED = 2
Public Type RECTL
Left As Long
Top As Long
Right As Long
Bottom As Long
End Type
Public Type SIZEL
cx As Long
cy As Long
End Type
Public Type SECURITY_DESCRIPTOR
Revision As Byte
Sbz1 As Byte
Control As Long
Owner As Long
Group As Long
Sacl As Long ' ACL
Dacl As Long ' ACL
End Type
' The two definitions for FORM_INFO_1 make the coding easier.
Public Type FORM_INFO_1
Flags As Long
pName As Long ' String
Size As SIZEL
ImageableArea As RECTL
End Type
Public Type sFORM_INFO_1
Flags As Long
pName As String
Size As SIZEL
ImageableArea As RECTL
End Type
Public Type DEVMODE
dmDeviceName As String * CCHDEVICENAME
dmSpecVersion As Integer
dmDriverVersion As Integer
dmSize As Integer
dmDriverExtra As Integer
dmFields As Long
dmOrientation As Integer
dmPaperSize As Integer
dmPaperLength As Integer
dmPaperWidth As Integer
dmScale As Integer
dmCopies As Integer
dmDefaultSource As Integer
dmPrintQuality As Integer
dmColor As Integer
dmDuplex As Integer
dmYResolution As Integer
dmTTOption As Integer
dmCollate As Integer
dmFormName As String * CCHFORMNAME
dmUnusedPadding As Integer
dmBitsPerPel As Long
dmPelsWidth As Long
dmPelsHeight As Long
dmDisplayFlags As Long
dmDisplayFrequency As Long
End Type
Public Type PRINTER_DEFAULTS
pDatatype As String
pDevMode As Long ' DEVMODE
DesiredAccess As Long
End Type
Public Type PRINTER_INFO_2
pServerName As String
pPrinterName As String
pShareName As String
pPortName As String
pDriverName As String
pComment As String
pLocation As String
pDevMode As DEVMODE
pSepFile As String
pPrintProcessor As String
pDatatype As String
pParameters As String
pSecurityDescriptor As SECURITY_DESCRIPTOR
Attributes As Long
Priority As Long
DefaultPriority As Long
StartTime As Long
UntilTime As Long
Status As Long
cJobs As Long
AveragePPM As Long
End Type
Public Function GetFormName(ByVal PrinterHandle As Long, _
FormSize As SIZEL, FormName As String) As Integer
Dim NumForms As Long, I As Long
Dim FI1 As FORM_INFO_1
Dim aFI1() As FORM_INFO_1 ' Working FI1 array
Dim Temp() As Byte ' Temp FI1 array
Dim FormIndex As Integer
Dim BytesNeeded As Long
Dim RetVal As Long
FormName = vbNullString
FormIndex = 0
ReDim aFI1(1)
' First call retrieves the BytesNeeded.
RetVal = EnumForms(PrinterHandle, 1, aFI1(0), 0&amp;, BytesNeeded, NumForms)
ReDim Temp(BytesNeeded)
ReDim aFI1(BytesNeeded / Len(FI1))
' Second call actually enumerates the supported forms.
RetVal = EnumForms(PrinterHandle, 1, Temp(0), BytesNeeded, BytesNeeded, _
NumForms)
Call CopyMemory(aFI1(0), Temp(0), BytesNeeded)
For I = 0 To NumForms - 1
With aFI1(I)
If .Size.cx = FormSize.cx And .Size.cy = FormSize.cy then
' Found the desired form
FormName = PtrCtoVbString(.pName)
FormIndex = I + 1
Exit For
End If
End With
Next I
GetFormName = FormIndex ' Returns non-zero when form is found.
End Function
Public Function AddNewForm(PrinterHandle As Long, FormSize As SIZEL, _
FormName As String) As String
Dim FI1 As sFORM_INFO_1
Dim aFI1() As Byte
Dim RetVal As Long
With FI1
.Flags = 0
.pName = FormName
With .Size
.cx = FormSize.cx
.cy = FormSize.cy
End With
With .ImageableArea
.Left = 0
.Top = 0
.Right = FI1.Size.cx
.Bottom = FI1.Size.cy
End With
End With
ReDim aFI1(Len(FI1))
Call CopyMemory(aFI1(0), FI1, Len(FI1))
RetVal = AddForm(PrinterHandle, 1, aFI1(0))
If RetVal = 0 then
If Err.LastDllError = 5 then
MsgBox "Youdo
not have permissions to add a form to " &amp;
_
Printer.DeviceName, vbExclamation, "Access Denied!"
else
MsgBox "Error: " &amp;
Err.LastDllError, "Error Adding Form"
End If
AddNewForm = "none"
else
AddNewForm = FI1.pName
End If
End Function
Public Function PtrCtoVbString(ByVal Add As Long) As String
Dim sTemp As String * 512, x As Long
x = lstrcpy(sTemp, ByVal Add)
If (InStr(1, sTemp, Chr(0)) = 0) then
PtrCtoVbString = ""
else
PtrCtoVbString = Left(sTemp, InStr(1, sTemp, Chr(0)) - 1)
End If
End Function
Public Function SelectForm(FormName As String, ByVal MyhWnd As Long) _
As Integer
Dim nSize As Long ' Size of DEVMODE
Dim pDevMode As DEVMODE
Dim PrinterHandle As Long ' Handle to printer
Dim hPrtDC As Long ' Handle to Printer DC
Dim PrinterName As String
Dim aDevMode() As Byte ' Working DEVMODE
Dim FormSize As SIZEL
PrinterName = Printer.DeviceName ' Current printer
hPrtDC = Printer.hdc ' hDC for current Printer
SelectForm = FORM_NOT_SELECTED ' Set for failure unless reset in code.
' Get a handle to the printer.
If OpenPrinter(PrinterName, PrinterHandle, 0&amp;) then
' Retrieve the size of the DEVMODE.
nSize =do
cumentProperties(MyhWnd, PrinterHandle, PrinterName, 0&amp;, _
0&amp;, 0&amp;)
' Reserve memory for the actual size of the DEVMODE.
ReDim aDevMode(1 To nSize)
' Fill the DEVMODE from the printer.
nSize =do
cumentProperties(MyhWnd, PrinterHandle, PrinterName, _
aDevMode(1), 0&amp;, DM_OUT_BUFFER)
' Copy the Public (predefined) portion of the DEVMODE.
Call CopyMemory(pDevMode, aDevMode(1), Len(pDevMode))

' If FormName is "MyCustomForm", we must make sure it exists
' before using it. Otherwise, it came from our EnumForms list,
' and wedo
not need to check first. Note that we could have
' passed in a Flag instead of checking for a literal name.
If FormName = "MyCustomForm" then
' Use form "MyCustomForm", adding it if necessary.
' Set the desired size of the form needed.
With FormSize ' Given in thousandths of millimeters
.cx = 214000 ' width
.cy = 216000 ' height
End With
If GetFormName(PrinterHandle, FormSize, FormName) = 0 then
' Form not found - Either of the next 2 lines will work.
'FormName = AddNewForm(PrinterHandle, FormSize, "MyCustomForm")
AddNewForm PrinterHandle, FormSize, "MyCustomForm"
If GetFormName(PrinterHandle, FormSize, FormName) = 0 then
ClosePrinter (PrinterHandle)
SelectForm = FORM_NOT_SELECTED ' Selection Failed!
Exit Function
else
SelectForm = FORM_ADDED ' Form Added, Selection succeeded!
End If
End If
End If

' Change the appropriate member in the DevMode.
' In this case, you want to change the form name.
pDevMode.dmFormName = FormName &amp;
Chr(0) ' Must be NULL terminated!
' Set the dmFields bit flag to indicate what you are changing.
pDevMode.dmFields = DM_FORMNAME
' Copy your changes back, then
update DEVMODE.
Call CopyMemory(aDevMode(1), pDevMode, Len(pDevMode))
nSize =do
cumentProperties(MyhWnd, PrinterHandle, PrinterName, _
aDevMode(1), aDevMode(1), DM_IN_BUFFER Or DM_OUT_BUFFER)
nSize = ResetDC(hPrtDC, aDevMode(1)) ' Reset the DEVMODE for the DC.
' Close the handle when you are finished with it.
ClosePrinter (PrinterHandle)
' Selection Succeeded! But was Form Added?
If SelectForm <> FORM_ADDED then
SelectForm = FORM_SELECTED
else
SelectForm = FORM_NOT_SELECTED ' Selection Failed!
End If
End Function
Public Sub PrintTest()
' Print two test pages to confirm the page size.
Printer.Print "Top of Page 1."
Printer.NewPage
' Spacing between lines should reflect the chosen page height.
Printer.Print "Top of Page 2. - Check the page Height (Length.)"
Printer.EndDoc
MsgBox "Check Printer " &amp;
Printer.DeviceName, vbInformation, "Done!"
End Sub
Run the project. The ListBox shows all of the forms that the current printer supports.
Click Command1. This adds "MyCustomForm - 214 mm X 216 mm ( xxx)" to the end of the list, where " xxx" is the number that is assigned to the new form.
Click a form in the ListBox, and then
click Command2. This prints a test page to the current printer using the selected form.
Click the new custom form in the ListBox, and then
click Command3. You are prompted to confirm the deletion of the form. If you click Yes, it removes the custom form. If you try this with a predefined form, it raises error 87 because only custom forms can be deleted.
References
For more information on the functions and types that are used in this article, see the MSDN Library CD or the Win32 SDK Programmer's Guide.
For additional information on forms, click the article number below to view the article in the Microsoft Knowledge Base:
Q157172 How to Create Custom Forms in Windows NT 4.0 and Windows 2000
First Published: Dec 15 2000 2:25PM
Keywords: kbprint kbSample kbAPI kbPrinting kbSpooler kbVBp kbVBp500 kbVBp600 kbGrpDSVB kbDSupport kbhowto user defined

 

Similar threads

后退
顶部