转贴：
Delphi 4 Developer's Guide Coding Standards Document
Copyright ?1998 Xavier Pacheco and Steve Teixeira
Delphi 4 Developer's Guide Homepage
Introduction
General Source Code Formatting Rules
Indentation
Margins
Begin..End Pair
Object Pascal
Parenthesis
Reserved Words and Key Words
Procedures and Functions (Routines)
Variables
Structured Types
Array Types
Record Types
Statements
if Statements
case Statements
while Statements
for Statements
repeat statements
with Statements
Structured Exception Handling
General Topics
Use of try..finally
Use of try..except
Use of try..except..else
Classes
Fields
Methods
Use of Static Methods
Use of virtual/dynamic Methods
Use of Abstract Methods
Property Access Methods
Properties
Naming/Formatting
Use of Access Methods
Files
Project Files
Form Files
Data Module Files
Remote Data Module Files
Unit Files
General Unit Structure
Unit Name
Uses Clauses
Interface Section
Implementation Section
Initialization Section
Finalization Section
Form Units
Data Module Units
General Purpose Units
Component Units
File Headers
Forms and Data Modules
Forms
Form Type Naming Standard
Form Instance Naming Standard
Auto-creating Forms
Modal Form Instantiation Functions
Data Modules
Data Module Naming Standard
Data Module Instance Naming Standard
Packages
Use of Runtime vs Design Packages
File Naming Standards
Components
User-defined Components
Component Units
Use of Registration Units
Component Instance Naming Conventions
Component Prefixes
Standard Tab
Additional Tab
Win32 Tab
System Tab
Internet Tab
Data Access Tab
Data Controls Tab
Decision Cube Tab
QReport Tab
Dialogs Tab
Win31 Tab
Samples Tab
ActiveX Tab
Midas Tab
Introduction
This document describes the coding standards for Delphi programming as used in Delphi 4 Developer's Guide. In general, this document follows the often "unspoken" formatting guidelines used by Borland International with a few minor exceptions. The purpose for including this document in Delphi 4 Developer's Guide is to present a method by which development teams can enforce a consistent style to the coding that they do. The intent is to make it so that every programmer on a team can understand the code being written by other programmers. This is accomplished by making the code more readable by use of consistency.
This document by no means includes everything that might exist in a coding standard. However, it does contain enough detail to get you started. Feel free to use and modify these standards to fit your needs. We don't recommend, however, that you deviate too far from the standards used by Borland's development staff. We recommend this because as you bring new programmers to your team, the standards that they are most likely to be most familiar with are Borland's. Like most coding standards documents, this document will evolve as needed. Therefore, you’ll find the most updated version online at www.xapware.com/ddg This document does not cover user interface standards. This is a separate but equally important topic. Enough third-party books and Microsoft documentation cover such guidelines that we decided not to replicate this information but rather to refer you to the Microsoft Developers Network and other sources where that information may be available.
General Source Code Formatting Rules
Indentation
Indenting will be two spaces per level. Do not save tab characters to source files. The reason for this is because tab characters are expanded to different widths with different users settings and by different source management utilities (print, archive, version control, etc.).
You can disable saving tab characters by turning off the "Use tab character" and "Optimal fill" checkboxes on the Editor page of the Environment Options dialog (accessed via Tools | Environment).
Margins
Margins will be set to 80 characters. In general, source shall not exceed this margin with the exception to finish a word, but this guideline is somewhat flexible. Wherever possible, statements that extend beyond one line should be wrapped after a comma or an operator. When a statement is wrapped, it should be indented two characters from the original statement line.
Begin..End Pair
The begin statement appears on its own line. For example, the following first line is incorrect; the second line is correct:
for I := 0 to 10 do begin // Incorrect, begin on same line as for
for I := 0 to 10 do // Correct, begin appears on a separate line
begin
An exception to this rule is when the begin statement appears as part of an else clause-for example,
if some statement = then
begin
...
end
else begin
SomeOtherStatement;
end;
The end statement always appears on its own line.
When the begin statement is not part of an else clause, the corresponding end statement is always indented to match its begin part.
Object Pascal
Parenthesis
There shall never be white space between an open parenthesis and the next character. Likewise, there shall never be white space between a closed parenthesis and the previous character. The following example illustrates incorrect and correct spacing with regard to parentheses:
CallProc( AParameter ); // incorrect
CallProc(AParameter); // correct
Never include extraneous parentheses in a statement. Parentheses should only be used where required to achieve the intended meaning in source code. The following examples illustrate incorrect and correct usage:
if (I = 42) then // incorrect - extraneous parentheses
if (I = 42) or (J = 42) then // correct - parentheses required
Reserved Words and Key Words
Object Pascal language reserved words and key words shall always be completely lowercase.
Procedures and Functions (Routines)
Naming/Formatting
Routine names shall always begin with a capital letter and be camel-capped for readability. The following is an example of an incorrectly formatted procedure name:
procedure thisisapoorlyformattedroutinename;
This is an example of an appropriately capitalized routine name:
procedure ThisIsMuchMoreReadableRoutineName;
Routines shall be given names meaningful to their content. Routines that cause an action to occur will be prefixed with the action verb, for example:
procedure FormatHardDrive;
Routines that set values of input parameters shall be prefixed with the word set-for example,
procedure SetUserName;
Routines that retrieve a value shall be prefixed with the word get-for example,
function GetUserName: string;
Formal Parameters
Formatting
Where possible, formal parameters of the same type shall be combined into one statement:
procedure Foo(Param1, Param2, Param3: Integer; Param4: string);
Naming
All formal parameter names will be meaningful to their purpose and typically will be based off the name of the identifier that was passed to the routine. When appropriate, parameter names will be prefixed with the character A-for example,
procedure SomeProc(AUserName: string; AUserAge: integer);
The "A" prefix is a convention to disambiguate when the parameter name is the same as a property or field name in the class.
Ordering of Parameters
The following formal parameter ordering emphasizes taking advantage of register calling conventions calls.
Most frequently used (by the caller) parameters shall be in the first parameter slots. Less frequently used parameters shall be listed after that in left to right order.
Input lists shall exist before output lists in left to right order.
Place most generic parameters before most specific parameters in left to right order. For example: SomeProc(APlanet, AContinent, ACountry, AState, ACity).
Exceptions to the ordering rule are possible, such as in the case of event handlers, when a parameter named Sender of type TObject is often passed as the first parameter.
Constant Parameters
When parameters of record, array, ShortString, or interface type are unmodified by a routine, the formal parameters for that routine shall mark the parameter as const. This ensures that the compiler will generate code to pass these unmodified parameters in the most efficient manner.
Parameters of other types may optionally be marked as const if they are unmodified by a routine. Although this will have no effect on efficiency, it provides more information about parameter use to the caller of the routine.
Name Collisions
When using two units that each contain a routine of the same name, the routine residing unit appearing last in the uses clause will be invoked if you call that routine. To avoid these uses-clause-dependent ambiguities, always prefix such method calls with the intended unit name-for example,
SysUtils.FindClose(SR);
or
Windows.FindClose(Handle);
Variables
Variable Naming and Formatting
Variables will be given names meaningful to their purpose.
Loop control variables are generally given a single character name such as I, J, or K. It is acceptable to use a more meaningful name as well such as UserIndex.
Boolean variable names must be descriptive enough so that their meanings of True and False values will be clear.
Local Variables
Local variables used within procedures follow the same usage and naming conventions for all other variables. Temporary variables will be named appropriately.
When necessary, initialization of local variables will occur immediately upon entry into the routine. Local AnsiString variables are automatically initialized to an empty string, local interface and dispinterface type variables are automatically initialized to nil, and local Variant and OleVariant type variables are automatically initialized to Unassigned.
Use of Global Variables
Use of global variables is discouraged. However, they may be used when necessary. When this is the case, you are encouraged to keep global variables within the context where they are used. For example, a global variable may be global only within the scope of the a single unit’s implementation section.
Global data that is intended to be used by a number of units shall be moved into a common unit used by all.
Global data may be initialized with a value directly in the var section. Bear in mind that all global data is automatically zero-initialized, so do not initialize global variables to "empty" values such as 0, nil, '', Unassigned, and so on. One reason for this is because zero-initialized global data occupies no space in the exe file. Zero-initialized data is stored in a ‘virtual’ data segment that is allocated only in memory when the application starts up. Non-zero initialized global data occupies space in the exe file on disk.
Types
Capitalization Convention
Type names that are reserved words shall be completely lowercase. Win32 API types are generally completely uppercase, and you should follow the convention for a particular type name shown in the Windows.pas or other API unit. For other variable names, the first letter shall be uppercase, and the rest shall be camel-capped for clarity. Here are some examples:
var
MyString: string; // reserved word
WindowHandle: HWND; // Win32 API type
I: Integer; // type identifier introduced in System unit
Floating Point Types
Use of the Real type is discouraged because it exists only for backward compatibility with older Pascal code. Use Double for general purpose floating point needs. Also, Double is what the processor instructions and busses are optimized for and is an IEEE defined standard data format. Use Extended only when more range is required than that offered by Double. Extended is an Intel specified type and not supported on Java. Use Single only when the physical byte size of the floating point variable is significant (such as when using other-language DLLs).
Enumerated Types
Names for enumerated types must be meaningful to the purpose of the enumeration. The type name must be prefixed with the T character to annotate it as a type declaration. The identifier list of the enumerated type must contain a lowercase two to three character prefix that relates it to the original enumerated type name-for example,
TSongType = (stRock, stClassical, stCountry, stAlternative, stHeavyMetal, stRB);
Variable instances of an enumerated type will be given the same name as the type without the T prefix (SongType) unless there is a reason to give the variable a more specific name such as FavoriteSongType1, FavoriteSongType2, and so on.
Variant and OleVariant
The use of the Variant and OleVariant types is discouraged in general, but these types are necessary for programming when data types are known only at runtime, such as is often the case in COM and database development. Use OleVariant for COM-based programming such as Automation and ActiveX controls, and use Variant for non-COM programming. The reason is that a Variant can store native Delphi strings efficiently (same as a string var), but OleVariant converts all strings to Ole Strings (WideChar strings) and are not reference counted-they are always copied.
Structured Types
Array Types
Names for array types must be meaningful to the purpose for the array. The type name must be prefixed with a T character. If a pointer to the array type is declared, it must be prefixed with the character P and declared immediately prior to the type declaration -for example,
type
PCycleArray = ^TCycleArray;
TCycleArray = array[1..100] of integer;
When practical, variable instances of the array type will be given the same name as the type name without the T prefix.
Record Types
A record type shall be given a name meaningful to its purpose. The type declaration must be prefixed with the character T. If a pointer to the record type is declared, it must be prefixed with the character P and declared immediately prior to the type declaration. The type declaration for each element may optionally be aligned in a column to the right-for example,
type
PEmployee = ^TEmployee;
TEmployee = record
EmployeeName: string
EmployeeRate: Double;
end;
Statements
if Statements
The most likely case to execute in an if/then/else statement shall be placed in the then clause, with less likely cases residing in the else clause(s).
Try to avoid chaining if statements and use case statements instead if at all possible.
Do not nest if statements more than five levels deep. Create a clearer approach to the code.
Do not use extraneous parentheses in an if statement.
If multiple conditions are being tested in an if statement, conditions should be arrange from left to right in order of least to most computation intensive. This enables your code to take advantage of short-circuit Boolean evaluation logic built into the compiler. For example, if Condition1 is faster than Condition2 and Condition2 is faster than Condition3, then the if statement should be constructed as follows:
if Condition1 and Condition2 and Condition3 then
case Statements
General Topics
The individual cases in a case statement should be ordered by the case constant either numerically or alphabetically.
The actions statements of each case should be kept simple and generally not exceed four to five lines of code. If the actions are more complex, the code should be placed in a separate procedure or function.
The use of the else clause of a case statement should be used only for legitimate defaults or to detect errors.
Formatting
case statements follow the same formatting rules as other constructs in regards to indentation and naming conventions.
while Statements
The use of the Exit procedure to exit a while loop is discouraged; when possible, you should exit the loop using only the loop condition.
All initialization code for a while loop should occur directly before entering the while loop and should not be separated by other non-related statements.
Any ending housekeeping shall be done immediately following the loop.
for Statements
for statements should be used in place of while statements when the code must execute for a known number of increments.
repeat statements
repeat statements are similar to while loops and should follow the same general guidelines.
with Statements
General Topics
The with statement should be used sparingly and with considerable caution. Avoid overuse of with statements and beware of using multiple objects, records, and so on in the with statement. For example:
with Record1, Record2 do
These things can confuse the programmer and can easily lead to difficult-to-detect bugs.
Formatting
with statements follow the same formatting rules in regard to naming conventions and indentation as described in this document.
Structured Exception Handling
General Topics
Exception handling should be used abundantly for both error correction and resource protection. This means that in all cases where resources are allocated, a try..finally must be used to ensure proper deallocation of the resource. The exception to this is cases where resources are allocated/freed in the initialization/finalization of a unit or the constructor/destructor of an object.
Use of try..finally
Where possible, each allocation will be matched with a try..finally construct. For example, the following code could lead to possible bugs:
SomeClass1 := TSomeClass.Create
SomeClass2 := TSomeClass.Create;
try
{ do some code }
finally
SomeClass1.Free;
SomeClass2.Free;
end;
A safer approach to the above allocation would be:
SomeClass1 := TSomeClass.Create
try
SomeClass2 := TSomeClass.Create;
try
{ do some code }
finally
SomeClass2.Free;
end;
finally
SomeClass1.Free;
end;
Use of try..except
Use try..except only when you want to perform some task when an exception is raised. In general, you should not use try..except to simply show an error message on the screen because that will be done automatically in the context of an application by the Application object. If you want to invoke the default exception handling after you have performed some task in the except clause, use raise to re-raise the exception to the next handler.
Use of try..except..else
The use of the else clause with try..except is discouraged because it will block all exceptions, even those for which you may not be prepared.
Classes
Naming/Formatting
Type names for classes will be meaningful to the purpose of the class. The type name must have the T prefix to annotate it as a type definition-for example,
type
TCustomer = class(TObject)
Instance names for classes will generally match the type name of the class without the T prefix-for example,
var
Customer: TCustomer;
Note: See section on "Component Type Naming Standards" for further information on naming components.
Fields
Naming/Formatting
Class field names follow the same naming conventions as variable identifiers except that they are prefixed with the F annotation to signify they are field names.
Visibility
All fields should be private. Fields that are accessible outside the class scope will be made accessible through the use of a property.
Methods
Naming/Formatting
Method names follow the same naming conventions as described for procedures and functions in this document.
Use of Static Methods
Use static methods when you do not intend for a method to be overridden by descendant classes.
Use of virtual/dynamic Methods
Use virtual methods when you intend for a method to be overridden by descendant classes. Dynamic should only be used on classes to which there will be there will be many descendant (direct or indirect). For example, a class containing one infrequently overridden method and 100 descendent classes should make that method dynamic to reduce the memory use by the 100 descendent classes.
Use of Abstract Methods
Do not use abstract methods on classes of which instances will be created. Use abstract only on base classes that will never be created.
Property Access Methods
All access methods must appear in the private or protected sections of the class definition.
Property access methods naming conventions follow the same rules as for procedures and functions. The read accessor method (reader method) must be prefixed with the word Get. The write accessor method (writer method) must be prefixed with the word Set. The parameter for the writer method will have the name Value, and its type will be that of the property it represents-for example,
TSomeClass = class(TObject)
private
FSomeField: Integer;
protected
function GetSomeField: Integer;
procedure SetSomeField( Value: Integer);
public
property SomeField: Integer read GetSomeField write SetSomeField;
end;
Properties
Naming/Formatting
Properties that serve as accessors to private fields will be named the same as the fields they represent without the F annotator.
Property names shall be nouns, not verbs. Properties represent data, methods represent actions.
Array property names shall be plural. Normal property names shall be singular.
Use of Access Methods
Although not required, it is encouraged to use at a minimum a write access method for properties that represent a private field.
Files
Project Files
Naming
Project files will be given descriptive names. For example, The Delphi 4 Developer's Guide Bug Manager is given the project name: DDGBugs.dpr. A system information program will be given a name like SysInfo.dpr.
Form Files
Naming
A form file will be given a name descriptive of the form's purpose postfixed with the three characters Frm. For example, the About Form will have a filename of AboutFrm.dpr. The Main Form will have the filename MainFrm.dpr.
Data Module Files
Naming
A data module will be given a name that is descriptive of the datamodule’s purpose. The name will be postfixed with the two characters DM. For example, the Customers data module will have a form filename of CustomersDM.dfm.
Remote Data Module Files
Naming
A remote data module will be given a name that is descriptive of the remote datamodule’s purpose. The name will be postfixed with the two characters RDM. For example, the Customers remote data module will have a form filename of CustomersRDM.dfm.
Unit Files
General Unit Structure
Unit Name
Unit files will be given descriptive names. For example, the unit containing an application's main form might be called MainFrm.pas.
Uses Clauses
The uses clause in the interface section will only contain units required by code in the interface section. Remove any extraneous unit names that might have been automatically inserted by Delphi.
The uses clause of the implementation section will only contain units required by code in the implementation section. Remove any extraneous unit names.
Interface Section
The interface section will contain declarations for only those types, variables, procedure/function forward declarations, and so on that are to be accessible by external units. Otherwise, these declarations will go into the implementation section.
Implementation Section
The implementation section shall contain any declarations for types, variables, procedures/functions and so on that are private to the containing unit.
Initialization Section
Do not place time-intensive code in the initialization section of a unit. This will cause the application to seem sluggish when first appearing.
Finalization Section
Ensure that you deallocate any items that you allocated in the Initialization section.
Form Units
Naming
A unit file for a form will be given the same name as its corresponding form file. For example, the About Form will have a unit name of AboutFrm.pas. The Main Form will have the unit filename of MainFrm.pas.
Data Module Units
Naming
Unit files for data modules will be given the same names as their corresponding form files. For example the Customers data module unit will have a unit name of CustomersDM.pas.
General Purpose Units
Naming
A general purpose unit will be given a name meaningful to the unit's purpose. For example, a utilities unit will be given a name of BugUtilities.pas. A unit containing global variables will be given the name of CustomerGlobals.pas.
Keep in mind that unit names must be unique across all packages used by a project. Generic or common unit names are not recommended.
Component Units
Naming
Component units will be placed in a separate directory to distinguish them as units defining components or sets of components. They will never be placed in the same directory as the project. The unit name must be meaningful to its content.
Note: See section on "User-defined Components"for further information on component naming standards.
File Headers
Use of informational file header is encouraged for all source files, project files, units, and so on. A proper file header must contain the following information:
{
Copyright ?YEAR by AUTHORS
}
Forms and Data Modules
Forms
Form Type Naming Standard
Forms types will be given names descriptive of the form's purpose. The type definition will be prefixed with a T. A descriptive name will follow the prefix. Finally, Form will postfix the descriptive name. For example, the type name for the About Form will be
TAboutForm = class(TForm)
The main form definition will be
TMainForm = class(TForm)
The customer entry form will have a name like
TCustomerEntryForm = class(TForm)
Form Instance Naming Standard
Form instances will be named the same as their corresponding types without the T prefix. For example, for the preceding form types, the instance names will be as follows:
Type Name Instance Name
TAboutForm AboutForm
TMainForm MainForm
TCustomerEntryForm CustomerEntryForm
Auto-creating Forms
Only the main form will be auto-created unless there is good reason to do otherwise. All other forms must be removed from the auto-create list in the Project Options dialog box. See the following section for more information.
Modal Form Instantiation Functions
All form units will contain a form instantiation function that will create, set up, show the form modally, and free the form. This function will return the modal result returned by the form. Parameters passed to this function will follow the "parameter passing" standard specified in this document. This functionality is to be encapsulated in this way to facilitate code reuse and maintenance.
The form variable will be removed from the unit and declared locally in the form instantiation function. Note, that this will require that the form be removed from the auto-create list in the Project Options dialog box. See "Auto-Creating Forms" later in this document.
For example, the following unit illustrates such a function for a GetUserData form.
unit UserDataFrm;
interface
uses
Windows, Messages, SysUtils, Classes, Graphics, Controls, Forms, Dialogs,
StdCtrls;
type
TUserDataForm = class(TForm)
edtUserName: TEdit;
edtUserID: TEdit;
private
{ Private declarations }
public
{ Public declarations }
end;
function GetUserData(var aUserName: String; var aUserID: Integer): Word;
implementation
{$R *.DFM}
function GetUserData(var aUserName: String; var aUserID: Integer): Word;
var
UserDataForm: TUserDataForm;
begin
UserDataForm := TUserDataForm.Create(Application);
try
UserDataForm.Caption := 'Getting User Data';
Result := UserDataForm.ShowModal;
if ( Result = mrOK ) then
begin
aUserName := UserDataForm.edtUserName.Text;
aUserID := StrToInt(UserDataForm.edtUserID.Text);
end;
finally
UserDataForm.Free;
end;
end;
end.
Data Modules
Data Module Naming Standard
A DataModule type will be given a name descriptive of the data module's purpose. The type definition will be prefixed with a T. A descriptive name will follow the prefix. Finally, the name will be postfixed with the word "DataModule".. For example, the type name for the Customer data module would be something like:
TCustomerDataModule = class(TDataModule)
The Orders data module would have a name like
TOrdersDataModule = class(TDataModule)
Data Module Instance Naming Standard
Data module instances will be named the same as their corresponding types without the T prefix. For example, for the preceding form types, the instance names will be as follows:
Type Name Instance Name
TCustomerDataModule CustomerDataModule
TOrdersDataModule OrdersDataModule
Packages
Use of Runtime vs Design Packages
Runtime packages will contain only units/components required by other components in that package. Other, units containing property/component editors and other design only code shall be placed into a design package. Registration units will be placed into a design package.
File Naming Standards
Packages will be named according to the following templates:
"iiilibvv.pkg" - design package
"iiistdvv.pkg" - runtime package
where the characters "iii" signify a 3-character identifying prefix. This prefix may be used to identify the company, person or any other identifying entity.
The characters "vv" signify a version for the package corresponding to the Delphi version for which the package is intended.
Note that the package name contains either "lib" or "std" to signify it as a runtime or design time package.
Where there are both design and runtime packages, the files will be named similarly. For example, packages for Delphi 4 Developer’s Guide are named as:
DdgLib40.pkg - design package
DdgStd40.pkg - runtime package
Components
User-defined Components
Component Type Naming StandardsComponents shall be named similarly to classes as defined in the section entitled "Classes" with the exception that they are given a 3-character identifying prefix. This prefix may be used to identify the company, person or any other entity. For example, a clock component written for Delphi 4 Developer’s Guide would be defined as:
TddgClock = class(TComponent)
Note that the 3-character prefix is in lower case.
Component Units
Component units shall contain only one major component. A major component is any component that appears on the Component Palette. Any ancillary components/objects may also reside in the same unit for the major component.
Use of Registration Units
The registration procedure for components shall be removed from the component unit and placed in a separate unit. This registration unit shall be used to register any components, property editors, component editors, experts, etc.
Component registering shall be done only in the design packages, therefore the registration unit shall be contained in the design package and not in the runtime package.
It is suggested that registration units are named as:
XxxReg.pas
Where the "Xxx" shall be a 3-character prefix used to identify a company, person or any other entity. For example, the registration unit for the components in the Delphi 4 Developer’s Guide would be named DdgReg.pas.
Component Instance Naming Conventions
All components must be given descriptive names. No components will be left with their default names assigned by Delphi. Components will have a lowercase prefix to designate their type. The reasoning behind prefixing component names rather than post-fixing them is to make searching component names in the Object Inspector and Code Explorer easier by component type.
Component Prefixes
The following prefixes will be assigned to the standard components that ship with Delphi 4. Please add to this list for third-party components as they are added.
Standard Tab
Prefix Component
mm TMainMenu
pm TPopupMenu
mmi TMainMenuItem
pmi TPopupMenuItem
lbl TLabel
edt TEdit
mem TMemo
btn TButton
cb TCheckBox
rb TRadioButton
lb TListBox
cb TComboBox
scb TScrollBar
gb TGroupBox
rg TRadioGroup
pnl TPanel
cl TCommandList
Additional Tab
Prefix Component
bbtn TBitBtn
sb TSpeedButton
me TMaskEdit
sg TStringGrid
dg TDrawGrid
img TImage
shp TShape
bvl TBevel
sbx TScrollBox
clb TCheckListbox
spl TSplitter
stx TStaticText
cht TChart
Win32 Tab
Prefix Component
tbc TTabControl
pgc TPageControl
il TImageList
re TRichEdit
tbr TTrackBar
prb TProgressBar
ud TUpDown
hk THotKey
ani TAnimate
dtp TDateTimePicker
tv TTreeView
lv TListView
hdr THeaderControl
stb TStatusBar
tlb TToolBar
clb TCoolBar
System Tab
Prefix Component
tm TTimer
pb TPaintBox
mp TMediaPlayer
olec TOleContainer
ddcc TDDEClientConv
ddci TDDEClientItem
ddsc TDDEServerConv
ddsi TDDEServerItem
Internet Tab
Prefix Component
csk TClientSocket
ssk TServerSocket
wbd TWebDispatcher
pp TPageProducer
tp TQueryTableProducer
dstp TDataSetTableProducer
nmdt TNMDayTime
nec TNMEcho
nf TNMFinger
nftp TNMFtp
nhttp TNMHttp
nMsg TNMMsg
nmsg TNMMSGServ
nntp TNMNNTP
npop TNMPop3
nuup TNMUUProcessor
smtp TNMSMTP
nst TNMStrm
nsts TNMStrmServ
ntm TNMTime
nudp TNMUdp
psk TPowerSock
ngs TNMGeneralServer
html THtml
url TNMUrl
sml TSimpleMail
Data Access Tab
Prefix Component
ds TDataSource
tbl TTable
qry TQuery
sp TStoredProc
db TDataBase
ssn TSession
bm TBatchMove
usql TUpdateSQL
Data Controls Tab
Prefix Component
dbg TDBGrid
dbn TDBNavigator
dbt TDBText
dbe TDBEdit
dbm TDBMemo
dbi TDBImage
dblb TDBListBox
dbcb TDBComboBox
dbch TDBCheckBox
dbrg TDBRadioGroup
dbll TDBLookupListBox
dblc TDBLookupComboBox
dbre TDBRichEdit
dbcg TDBCtrlGrid
dbch TDBChart
Decision Cube Tab
Prefix Component
dcb TDecisionCube
dcq TDecisionQuery
dcs TDecisionSource
dcp TDecisionPivot
dcg TDecisionGrid
dcgr TDecisionGraph
QReport Tab
Prefix Component
qr TQuickReport
qrsd TQRSubDetail
qrb TQRBand
qrcb TQRChildBand
qrg TQRGroup
qrl TQRLabel
qrt TQRText
qre TQRExpr
qrs TQRSysData
qrm TQRMemo
qrrt TQRRichText
qrdr TQRDBRichText
qrsh TQRShape
qri TQRImage
qrdi TQRDBMImage
qrcr TQRCompositeReport
qrp TQRPreview
qrch TQRChart
Dialogs Tab
The dialog box components are really forms encapsulated by a component. Therefore, they will follow a convention similar to the form naming convention. The type definition is already defined by the component name. The instance name will be the same as the type instance without the numeric prefix, which is assigned by Delphi. Examples are as follows:
Type Instance Name
TOpenDialog OpenDialog
TSaveDialog SaveDialog
TOpenPictureDialog OpenPictureDialog
TSavePictureDialog SavePictureDialog
TFontDialog FontDialog
TColorDialog ColorDialog
TPrintDialog PrintDialog
TPrintSetupDialog PrinterSetupDialog
TFindDialog FindDialog
TReplaceDialog ReplaceDialog
Win31 Tab
Prefix Component
dbll TDBLookupList
dblc TDBLookupCombo
ts TTabSet
ol TOutline
tnb TTabbedNoteBook
nb TNoteBook
hdr THeader
flb TFileListBox
dlb TDirectoryListBox
dcb TDriveComboBox
fcb TFilterComboBox
Samples Tab
Prefix Component
gg TGauge
cg TColorGrid
spb TSpinButton
spe TSpinEdit
dol TDirectoryOutline
cal TCalendar
ibea TIBEventAlerter
ActiveX Tab
Prefix Component
cfx TChartFX
vsp TVSSpell
f1b TF1Book
vtc TVTChart
grp TGraph
Midas Tab
Prefix Component
prv TProvider
cds TClientDataSet
qcds TQueryClientDataSet
dcom TDCOMConnection
olee TOleEnterpriseConnection
sck TSocketConnection
rms TRemoteServer
mid TmidasConnection
