在Delphi6下安装张阳的读硬盘序列号的控件出错？(100分)

// Read sector
xor ecx,ecx
mov dx,01f0h
@3:in ax,dx
mov word ptr dd[ecx*2],ax //这一句出错 ,提示：Inline assembler syntax error
inc ecx
cmp ecx,256
jne @3
－－－－－－－－－－－－－－－－－－－－－－－
procedure Change2Ring0();
var i :integer;
begin
asm
mov eax, offset Ring0Proc
mov OurGate.off2, ax // 将 中 断 函 数 的 地 址
shr eax, 16 // 填 入 新 造 的 中 断 门
mov OurGate.off1, ax // 描 述 符
mov OurGate.op,0028h
mov OurGate.seg,0ee00h //这一句跟上句的从错误一样
mov ebx,offset IDTR
sidt [ebx]
// 将 中 断 描 述 符 表 寄 存 器（IDTR）的 内 容 取 出
mov ebx, dword ptr [IDTR+2]
// 取 出 中 断 描 述 符 表（IDT） 基 地 址
add ebx, 8*3
// 计 算Int 3 的 描 述 符 应 放 置 的 地 址 选 用
//Int3 是 因 为 它 在Win32 保 护 模 式 下 未 占 用

不用安装了，我给一个自己的函数给你吧。
－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－
function GetIdeDiskSerialNumber : String;
type
TSrbIoControl = packed record
HeaderLength : ULONG;
Signature : Array[0..7] of Char;
Timeout : ULONG;
ControlCode : ULONG;
ReturnCode : ULONG;
Length : ULONG;
end;
SRB_IO_CONTROL = TSrbIoControl;
PSrbIoControl = ^TSrbIoControl;

TIDERegs = packed record
bFeaturesReg : Byte; // Used for specifying SMART "commands".
bSectorCountReg : Byte; // IDE sector count register
bSectorNumberReg : Byte; // IDE sector number register
bCylLowReg : Byte; // IDE low order cylinder value
bCylHighReg : Byte; // IDE high order cylinder value
bDriveHeadReg : Byte; // IDE drive/head register
bCommandReg : Byte; // Actual IDE command.
bReserved : Byte; // reserved for future use. Must be zero.
end;
IDEREGS = TIDERegs;
PIDERegs = ^TIDERegs;

TSendCmdInParams = packed record
cBufferSize : DWORD; // Buffer size in bytes
irDriveRegs : TIDERegs; // Structure with drive register values.
bDriveNumber : Byte; // Physical drive number to send command to (0,1,2,3).
bReserved : Array[0..2] of Byte; // Reserved for future expansion.
dwReserved : Array[0..3] of DWORD; // For future use.
bBuffer : Array[0..0] of Byte; // Input buffer.
end;
SENDCMDINPARAMS = TSendCmdInParams;
PSendCmdInParams = ^TSendCmdInParams;

TIdSector = packed record
wGenConfig : Word;
wNumCyls : Word;
wReserved : Word;
wNumHeads : Word;
wBytesPerTrack : Word;
wBytesPerSector : Word;
wSectorsPerTrack : Word;
wVendorUnique : Array[0..2] of Word;
sSerialNumber : Array[0..19] of Char;
wBufferType : Word;
wBufferSize : Word;
wECCSize : Word;
sFirmwareRev : Array[0..7] of Char;
sModelNumber : Array[0..39] of Char;
wMoreVendorUnique : Word;
wDoubleWordIO : Word;
wCapabilities : Word;
wReserved1 : Word;
wPIOTiming : Word;
wDMATiming : Word;
wBS : Word;
wNumCurrentCyls : Word;
wNumCurrentHeads : Word;
wNumCurrentSectorsPerTrack : Word;
ulCurrentSectorCapacity : ULONG;
wMultSectorStuff : Word;
ulTotalAddressableSectors : ULONG;
wSingleWordDMA : Word;
wMultiWordDMA : Word;
bReserved : Array[0..127] of Byte;
end;
PIdSector = ^TIdSector;

const
IDE_ID_FUNCTION = $EC;
IDENTIFY_BUFFER_SIZE = 512;
DFP_RECEIVE_DRIVE_DATA = $0007c088;
IOCTL_SCSI_MINIPORT = $0004d008;
IOCTL_SCSI_MINIPORT_IDENTIFY = $001b0501;
DataSize = sizeof(TSendCmdInParams)-1+IDENTIFY_BUFFER_SIZE;
BufferSize = SizeOf(SRB_IO_CONTROL)+DataSize;
W9xBufferSize = IDENTIFY_BUFFER_SIZE+16;
var
hDevice : THandle;
cbBytesReturned : DWORD;
pInData : PSendCmdInParams;
pOutData : Pointer; // PSendCmdInParams;
Buffer : Array[0..BufferSize-1] of Byte;
srbControl : TSrbIoControl absolute Buffer;

procedure ChangeByteOrder( var Data; Size : Integer );
var ptr : PChar;
i : Integer;
c : Char;
begin
ptr := @Data;
for i := 0 to (Size shr 1)-1 do
begin
c := ptr^;
ptr^ := (ptr+1)^;
(ptr+1)^ := c;
Inc(ptr,2);
end;
end;

begin
Result := '';
FillChar(Buffer,BufferSize,#0);
if Win32Platform=VER_PLATFORM_WIN32_NT then
begin // Windows NT, Windows 2000
// Get SCSI port handle
hDevice := CreateFile( '//./Scsi0:', GENERIC_READ or GENERIC_WRITE,
FILE_SHARE_READ or FILE_SHARE_WRITE, nil, OPEN_EXISTING, 0, 0 );
if hDevice=INVALID_HANDLE_VALUE then Exit;
try
srbControl.HeaderLength := SizeOf(SRB_IO_CONTROL);
System.Move('SCSIDISK',srbControl.Signature,8);
srbControl.Timeout := 2;
srbControl.Length := DataSize;
srbControl.ControlCode := IOCTL_SCSI_MINIPORT_IDENTIFY;
pInData := PSendCmdInParams(PChar(@Buffer)+SizeOf(SRB_IO_CONTROL));
pOutData := pInData;
with pInData^ do
begin
cBufferSize := IDENTIFY_BUFFER_SIZE;
bDriveNumber := 0;
with irDriveRegs do
begin
bFeaturesReg := 0;
bSectorCountReg := 1;
bSectorNumberReg := 1;
bCylLowReg := 0;
bCylHighReg := 0;
bDriveHeadReg := $A0;
bCommandReg := IDE_ID_FUNCTION;
end;
end;
if not DeviceIoControl( hDevice, IOCTL_SCSI_MINIPORT, @Buffer, BufferSize, @Buffer, BufferSize, cbBytesReturned, nil ) then Exit;
finally
CloseHandle(hDevice);
end;
end
else
begin // Windows 95 OSR2, Windows 98
hDevice := CreateFile( '//./SMARTVSD', 0, 0, nil, CREATE_NEW, 0, 0 );
if hDevice=INVALID_HANDLE_VALUE then Exit;
try
pInData := PSendCmdInParams(@Buffer);
pOutData := PChar(@pInData^.bBuffer);
with pInData^ do
begin
cBufferSize := IDENTIFY_BUFFER_SIZE;
bDriveNumber := 0;
with irDriveRegs do
begin
bFeaturesReg := 0;
bSectorCountReg := 1;
bSectorNumberReg := 1;
bCylLowReg := 0;
bCylHighReg := 0;
bDriveHeadReg := $A0;
bCommandReg := IDE_ID_FUNCTION;
end;
end;
if not DeviceIoControl( hDevice, DFP_RECEIVE_DRIVE_DATA, pInData, SizeOf(TSendCmdInParams)-1, pOutData, W9xBufferSize, cbBytesReturned, nil ) then Exit;
finally
CloseHandle(hDevice);
end;
end;
with PIdSector(PChar(pOutData)+16)^ do
begin
ChangeByteOrder(sSerialNumber,SizeOf(sSerialNumber));
SetString(Result,sSerialNumber,SizeOf(sSerialNumber));
end;
end;

接受答案了.