redhat9.0已经安装TNT2驱动4496，startx显示NVIDIA徽标，但系统设置，显示里更改不了刷新频率 ( 积分: 200 )

redhat9.0已经安装TNT2驱动4496，startx显示NVIDIA徽标，但系统设置->显示里更改不了刷新频率
运行xrandr -s 800x600 - 85好像提示超出范围，但windows下都可以设置85以上
紧急求助，眼睛太吃力了

redhat9.0已经安装TNT2驱动4496，startx显示NVIDIA徽标，但系统设置->显示里更改不了刷新频率
运行xrandr -s 800x600 - 85好像提示超出范围，但windows下都可以设置85以上
紧急求助，眼睛太吃力了

希望有linux高手指点迷津，先谢过

修改 /etc/X11/xorg.conf试试(管杀不管埋)

试试，我以前修改过/etc/X11/XF86Config，加了用gtf -s 800 600 85产生的语句，但还是不行

显示器也需要选择.另外,一般的显示器75也可以接受了

没有xorg.conf
我的配置文件XF86Config如下，有耐心的大虾帮忙看看，还有我的显示器没法选阿，
没这牌子，但Win 2000下都能上100
# XFree86 4 configuration created by redhat-config-xfree86
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0"
0 0
InputDevice "Mouse0"
"CorePointer"
InputDevice "Keyboard0"
"CoreKeyboard"
InputDevice "DevInputMice"
"AlwaysCore"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt"
or ".db&quot. There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules"
"xfree86"
Option "XkbModel"
"pc105"
Option "XkbLayout"
"us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol"
"IMPS/2"
Option "Device"
"/dev/psaux"
Option "ZAxisMapping"
"4 5"
Option "Emulate3Buttons"
"no"
EndSection
Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol"
"IMPS/2"
Option "Device"
"/dev/input/mice"
Option "ZAxisMapping"
"4 5"
Option "Emulate3Buttons"
"no"
EndSection
Section "Monitor"
identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Unknown monitor"
HorizSync 31.5 - 70.9
VertRefresh 50.0 - 70.0
# 800x600 @ 85.00 Hz (GTF) hsync: 53.55 kHz;
pclk: 56.55 MHz
Modeline "800x600_85.00"
56.55 800 840 928 1056 600 601 604 630 -HSync +Vsync
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "Videocard vendor"
BoardName "RIVA TNT2"
VideoRam 16384
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "800x600"
"640x480"
EndSubSection
EndSection

显示器选择一个规格接近的即可.所谓的选择,其实就是指明规格.可以设定为标准SVGA等

搞定了，主要是显示器的规格，没有可选的，我自己设置了行频，场频就可以了
zjan521，分给你了