A
AndyStone
Unregistered / Unconfirmed
GUEST, unregistred user!
用Delphi怎样可以把声卡声音直接录制成MP3？ lameEnc.dll 怎样用，可否给我一个源代码？
您正在使用一款已经过时的浏览器！部分功能不能正常使用。
请尝试升级或使用 其他浏览器。
请尝试升级或使用 其他浏览器。
W
woyaoying
Unregistered / Unconfirmed
GUEST, unregistred user!
用些工具可以直接编码。
可是DELPHI还没有试过~~~
可是DELPHI还没有试过~~~
江
江南大米
Unregistered / Unconfirmed
GUEST, unregistred user!
lame_enc.dll 是有源码的啊！http://sourceforge.net上就有开放源码！
我把对那个DLL的函数说明贴上来吧！
Lame-enc DLL
Interface version 1.32 (and above)
(Lame engine version: 3.93 or higher)
Programmers Manual
The lame_enc.dll and this manual is copyright by Albert L Faber
Originally the the DLL interface is modeled after the BladeEnc DLL interface
which is copyrighted by Tord Jansson and Jukka Poikolainen
Thisdo
cument and the DLL interface may be distributed freely
as long as modifications are released under the LGPL license.
Homepage: http://www.cdex.n3.net
E-mail: mailto: afaber@users.sourceforge.net
Distribution
People and companies who wants to distribute lame_enc.dll with their commercial products are free todo
so as far as I'm concerned (LGPL license), but should be aware that lame_enc.dll might infringe certain MP3 related software patents held by Fraunhofer IIS in certain countries.
Disclaimer
lame_enc.dll and this manual is distributed 'as is' with no warranty of any kind. The Author is not to be held responsible for the result of any use or misuse of this product.
Current Bugs and Limitations
Although the interface is designed to be able to handle multiple parallel streams it can't bedo
ne yet due to limitations in the engine, only one stream is allowed.
Future Compatibility
This interface should be compatible with all future versions of lame_enc.DLL without any need to recompile your programs. You should therefore not check the version number upon start and prevent users from running your program with a later version of lame_enc.DLL.
--------------------------------------------------------------------------------
How to use the DLL
1. Fill in a BE_CONFIG structure and send it to beInitStream(). Make sure that BE_ERR_SUCCESSFUL is returned.
2. Reserve at least the amount of memory returned in dwBufferSize as your output buffer.
3. Call beEncodeChunk() until you've encoded everything you want.
4. Call beDeinitStream() to make sure that all encoded data is flushed out before closing the stream.
5. Close the stream using beCloseStream()
6. Finally, call the beWriteVBRHeader() functions, to insert the INFO tag MP3 Header. This is an extension of the Xing VBR tag which is also used for CBR encodings. This call can only be omitted if the INFO tag was explicilty disabled in the BE_CONFIG Structure.
A handy feature is the available Lame_enc.dll debug option, which will dump the important lame internal settings to a text file.
Return Values
See the header-file for a complete list of function return values. All functions should return BE_ERR_SUCCESSFUL unless something went wrong.
--------------------------------------------------------------------------------
Type definitions
The DLL is by default compiled with the MS Visual C/C++ compiler, which has the following type definitions:
Type Description
CHAR signed char (8 bits)
BYTE unsigned char (8 bits)
SHORT signed short (16 bits)
WORD unsigned short (16 bits)
INT signed long (32 bits)
LONG signed long (32 bits)
BOOL signed long (32 bits) (YES, 32 bits for a one bit value)
TRUE = 0
FALSE=-1
DWORD unsigned long (32 bits)
FLOAT floating point (32 bits)
DOUBLE float point (64 bits)
LPCSTR const char* (32 bits pointer to zero terminated character string)
Within the lame_enc.dll All the structure elements are one byte alligned (due to backwards compatibility with BladEnc.DLL!
--------------------------------------------------------------------------------
The BE_CONFIG Structure
Currently there the BE_CONFIG structure has to varians, the old MP3 config structure that is truly compatible with the old BladeEnc interface, and the new defined LHV1 structure, which can set far more options in the lame encoder
The MP3 BE_CONFIG - structure (OBSOLETE)
This is the old structure as it was originally defined by the BladeEnc.DLL interface. However, Ido
highly recommend to use the new Lame specific config structure, since it gives you more control over the Lame encoder settings.
These are the members of the BE_CONFIG structure you need to fill in before you call beInitStream():
dwConfig Specifies what kind of output you want. Since only MP3 currently is supported you must set this to BE_CONFIG_MP3
format.mp3.dwSampleRate Samplerate in Hz for MP3 file. This can be set to either 32000, 44100 or 48000.
format.mp3.byMode Stereomode for MP3 file. This can be either BE_MP3_MODE_STEREO, BE_MP3_MODE_DUALCHANNEL or BE_MP3_MODE_MONO.
format.mp3.bitrate Bitrate (i.e. size) of MP3 file in kBit/s. Allowed bitrates are: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256 and 320.
format.mp3.bCopyright If this is set to TRUE the Copyright bit in the MP3 stream will be set.
format.mp3.bCRC Set this to TRUE in order to enable CRC-checksum in the bitstream.
format.mp3.bOriginal If this is set to TRUE the Original bit in the MP3 stream will be set.
format.mp3.bPrivate If this is set to TRUE the Private bit in the MP3 stream will be set.
The LHV1 BE_CONFIG - structure (recommended)
These are the members of the LHV1 BE_CONFIG structure, you need to fill in before you call beInitStream():
dwConfig Specifies what kind of output you want. Since only MP3 currently is supported you must set this to BE_CONFIG_LAME
format.LHV1.dwStructVersion Indicates the version number of the structure, current version number is 1
format.LHV1.dwStructSize Specifies the size of the BE_CONFIG structure (currently 331 bytes)
format.LHV1.dwSampleRate Samplerate in Hz for MP3 file. This can be set to either:
32000, 44100 or 48000 for MPEG-I
16000, 22050 or 24000 for MPEG-I
8000, 11025 or 12000 for MPEG-II.5
format.LHV1.dwReSampleRate Specifies to which sample rate the input stream has to be resampled, if set to 0, the encoder will decide which ReSample rate to use
format.LHV1.nMode Stereomode for MP3 file. This can be either BE_MP3_MODE_STEREO, BE_MP3_MODE_JSTEREO, BE_MP3_MODE_DUALCHANNEL or BE_MP3_MODE_MONO.
format.LHV1.dwBitrate For CBR, this specifies the actual bitrate, for VBR, it specifies the minimum bitrate
Allowed bitrates are: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256 and 320.for MPEG-I
Allowed bitrates are: 8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 144 and 160.for MPEG-II
Note: dwBitrate is used as the minimum bitrate in the case of using a VBR mode.
format.LHV1.dwMaxBitrate When VBR mode is enabled, it specifies the maximum allowed bitrate (see also dwBitrate to specify the minium bitrate), for CBR mode this setting is ignored.
format.LHV1.nPreset Keep in mind that the presets can overwrite some of the other settings, since it is called right before the encoder is initialized
The nPreset option can be set to one of the following presets values::
LQP_NOPRESET (don't use any presets)
LQP_NORMAL_QUALITY (quality is set to 5)
LQP_LOW_QUALITY (quality is set to 9)
LQP_HIGH_QUALITY (quality is set to 2)
LQP_VOICE_QUALITY (use for voice encoding)
LQP_R3MIX (r3mix preset option)
LQP_VERYHIGH_QUALITY (quality is set to 0)
LQP_STANDARD (lame command line alt-preset standard)
LQP_FAST_STANDARD (lame command line alt-preset fast standard)
LQP_EXTREME (lame command line alt-preset extreme)
LQP_FAST_EXTREME (lame command line alt-preset fast extreme)
LQP_INSANE (lame command line alt-preset insane)
LQP_ABR (lame command line alt-preset abr)
LQP_CBR(lame command line alt-preset cbr)
(old lame preset options)
LQP_PHONE
LQP_SW
LQP_AM
LQP_FM
LQP_VOICE
LQP_RADIO
LQP_TAPE
LQP_HIFI
LQP_CD
LQP_STUDIO
format.LHV1.bCopyright If this is set to TRUE the Copyright bit in the MP3 stream will be set.
format.LHV1.bCRC Set this to TRUE in order to enable CRC-checksum in the bitstream.
format.LHV1.bOriginal If this is set to TRUE the Original bit in the MP3 stream will be set.
format.LHV1.bPrivate If this is set to TRUE the Private bit in the MP3 stream will be set.
format.LHV1.nVbrMethod Sepecifes if the VBR method to use, currently the following settings are supported:
VBR_METHOD_NONE (don't use VBR, use CBR encoding instead),
VBR_METHOD_DEFAULT (default VBR method)
VBR_METHOD_OLD (old VBR method, proven to be reliable)
VBR_METHOD_NEW (new VBR method, faster than VBR_METHOD_OLD)
VBR_METHOD_MTRH (depreciated, same as VBR_METHOD_NEW)
VBR_METHOD_ABR (Average Bitrate Encoding, see also format.LHV1.dwVbrAbr_bps)
format.LHV1.bWriteVBRHeader Sepecifes if the a XING VBR header should be written or not. When this option is enabled, you have to call the beWriteVBRHeader function when encoding has been completed. Keep in mind that the VBR info tag can also be written for CBR encoded files, the TAG info can be useful for additional info like encoder delay and the like.
format.LHV1.bEnableVBR Specifies if VBR encoding option shall be used or not, possible values are TRUE/FALSE
format.LHV1.nVBRQuality Quality option if VBR is enabled (0=highest quality, 9 is lowest quality)
format.LHV1.dwVbrAbr_bps If the Average Bit Rate is specified, the lame encoder ignores the nVBRQuality settings (However, bEnableVBR must be set to TRUE and the format.LHV1.nVbrMethod parameter should be set to VBR_METHOD_ABR). The allowed range for the format.LHV1.dwVbrAbr_bps parameter any integer value between:
MPEG-I: 32000 .. 320000 bps
MPEG-II: 8000 .. 160000 bps
format.LHV1.bNoBitRes Disables the bit-resorvoir and disables the insertion of padded frames
format.LHV1.nQuality Quality Setting, HIGH BYTE should be NOT LOW byte, otherwhise quality is set to 5. This isdo
ne to be backward compatible. So to set quality to 3, you have to set the nQuality parameter to 0xFC03.
format.mp3.btReserved For future use, set all elements to zero
--------------------------------------------------------------------------------
beInitStream()
Synopsis: BE_ERR beInitStream( PBE_CONFIG pbeConfig, PDWORD dwSamples, PDWORD dwBufferSize, PHBE_STREAM phbeStream )
Parameters: pbeConfig Pointer at the struct containing encoder settings.
dwSamples Pointer atdo
uble word where number of samples to send to each beEncodeChunk() is returned.
dwBufferSize Pointer atdo
uble word where minimum size in bytes of output buffer is returned.
phbeStream Pointer at integer where Stream handle is returned.
Description: This function is the first to call before starting an encoding stream.
--------------------------------------------------------------------------------
beEncodeChunk()
Synopsis: BE_ERR beEncodeChunk( HBE_STREAM hbeStream, DWORD nSamples, PSHORT pSamples, PBYTE pOutput, PDWORD pdwOutput )
Parameters: hbeStream Handle of the stream.
nSamples Number of samples to be encoded for this call. This should be identical to what is returned by beInitStream(), unless you are encoding the last chunk, which might be smaller.
pSamples Pointer at the 16-bit signed samples to be encoded. These should be in stereo when encoding a stereo MP3 and mono when encoding a mono MP3.
pOutput Where to write the encoded data. This buffer should be at least of the minimum size returned by beInitStream().
pdwOutput Where to return number of bytes of encoded data written. The amount of data written might vary from chunk to chunk.
Description: Encodes a chunk of samples. Please note that if you have set the output to generate mono MP3 files you must feed beEncodeChunk() with mono samples!
--------------------------------------------------------------------------------
beDeinitStream()
Synopsis: BE_ERR beDeinitStream( HBE_STREAM hbeStream, PBYTE pOutput, PDWORD pdwOutput )
Parameters: hbeStream Handle of the stream.
pOutput Where to write the encoded data. This buffer should be at least of the minimum size returned by beInitStream().
pdwOutput Where to return number of bytes of encoded data written.
Description: This function should be called after encoding the last chunk in order to flush the encoder. It writes any encoded data that still might be left inside the encoder to the output buffer. This function should NOT be called unless you have encoded all of the chunks in your stream.
--------------------------------------------------------------------------------
beCloseStream()
Synopsis: BE_ERR beCloseStream( HBE_STREAM hbeStream )
Parameters: hbeStream Handle of the stream.
Description: Last function to be called when finished encoding a stream. Should unlike beDeinitStream() also be called if the encoding is canceled.
--------------------------------------------------------------------------------
beVersion()
Synopsis: VOID beVersion( PBE_VERSION pbeVersion )
Parameters: pbeVersion Pointer at struct where version number, release date and URL for homepage is returned.
Description: Returns information like version numbers (both of the DLL and encoding engine), release date and URL for lame_enc's homepage. All this information should be made available to the user of your product through a dialog box or something similar.
--------------------------------------------------------------------------------
beWriteVBRHeader()
Synopsis: VOID beWriteVBRHeader( LPCSTR pszMP3FileName )
Parameters: pszMP3FileName Const Pointer zero terminated string, that contains the MP3 file name.
Description: Writes a Xing Header in front of the MP3 file. Make sure that the MP3 file is closed, and the the beConfig.format.LHV1.bWriteVBRHeader has been set to TRUE. In addition, it is always save to call beWriteVBRHeader after the encoding has been finished, even when the beConfig.format.LHV1.bWriteVBRHeader is not set to TRUE
--------------------------------------------------------------------------------
Lame_enc.dll debug option
The lame_enc.dll has a built-in debug option, that dumps all the important internal settings to a text file. To enable this feature, create a text file in the Windows directory which is named lame_enc.ini, and should contain the following two lines
[debug]
WriteLogFile=1
Save this text file, and each time you encode a file, the settings are added to a file name lame_enc.txt, that is located in the same directory as the lame_enc.dll
我把对那个DLL的函数说明贴上来吧！
Lame-enc DLL
Interface version 1.32 (and above)
(Lame engine version: 3.93 or higher)
Programmers Manual
The lame_enc.dll and this manual is copyright by Albert L Faber
Originally the the DLL interface is modeled after the BladeEnc DLL interface
which is copyrighted by Tord Jansson and Jukka Poikolainen
Thisdo
cument and the DLL interface may be distributed freely
as long as modifications are released under the LGPL license.
Homepage: http://www.cdex.n3.net
E-mail: mailto: afaber@users.sourceforge.net
Distribution
People and companies who wants to distribute lame_enc.dll with their commercial products are free todo
so as far as I'm concerned (LGPL license), but should be aware that lame_enc.dll might infringe certain MP3 related software patents held by Fraunhofer IIS in certain countries.
Disclaimer
lame_enc.dll and this manual is distributed 'as is' with no warranty of any kind. The Author is not to be held responsible for the result of any use or misuse of this product.
Current Bugs and Limitations
Although the interface is designed to be able to handle multiple parallel streams it can't bedo
ne yet due to limitations in the engine, only one stream is allowed.
Future Compatibility
This interface should be compatible with all future versions of lame_enc.DLL without any need to recompile your programs. You should therefore not check the version number upon start and prevent users from running your program with a later version of lame_enc.DLL.
--------------------------------------------------------------------------------
How to use the DLL
1. Fill in a BE_CONFIG structure and send it to beInitStream(). Make sure that BE_ERR_SUCCESSFUL is returned.
2. Reserve at least the amount of memory returned in dwBufferSize as your output buffer.
3. Call beEncodeChunk() until you've encoded everything you want.
4. Call beDeinitStream() to make sure that all encoded data is flushed out before closing the stream.
5. Close the stream using beCloseStream()
6. Finally, call the beWriteVBRHeader() functions, to insert the INFO tag MP3 Header. This is an extension of the Xing VBR tag which is also used for CBR encodings. This call can only be omitted if the INFO tag was explicilty disabled in the BE_CONFIG Structure.
A handy feature is the available Lame_enc.dll debug option, which will dump the important lame internal settings to a text file.
Return Values
See the header-file for a complete list of function return values. All functions should return BE_ERR_SUCCESSFUL unless something went wrong.
--------------------------------------------------------------------------------
Type definitions
The DLL is by default compiled with the MS Visual C/C++ compiler, which has the following type definitions:
Type Description
CHAR signed char (8 bits)
BYTE unsigned char (8 bits)
SHORT signed short (16 bits)
WORD unsigned short (16 bits)
INT signed long (32 bits)
LONG signed long (32 bits)
BOOL signed long (32 bits) (YES, 32 bits for a one bit value)
TRUE = 0
FALSE=-1
DWORD unsigned long (32 bits)
FLOAT floating point (32 bits)
DOUBLE float point (64 bits)
LPCSTR const char* (32 bits pointer to zero terminated character string)
Within the lame_enc.dll All the structure elements are one byte alligned (due to backwards compatibility with BladEnc.DLL!
--------------------------------------------------------------------------------
The BE_CONFIG Structure
Currently there the BE_CONFIG structure has to varians, the old MP3 config structure that is truly compatible with the old BladeEnc interface, and the new defined LHV1 structure, which can set far more options in the lame encoder
The MP3 BE_CONFIG - structure (OBSOLETE)
This is the old structure as it was originally defined by the BladeEnc.DLL interface. However, Ido
highly recommend to use the new Lame specific config structure, since it gives you more control over the Lame encoder settings.
These are the members of the BE_CONFIG structure you need to fill in before you call beInitStream():
dwConfig Specifies what kind of output you want. Since only MP3 currently is supported you must set this to BE_CONFIG_MP3
format.mp3.dwSampleRate Samplerate in Hz for MP3 file. This can be set to either 32000, 44100 or 48000.
format.mp3.byMode Stereomode for MP3 file. This can be either BE_MP3_MODE_STEREO, BE_MP3_MODE_DUALCHANNEL or BE_MP3_MODE_MONO.
format.mp3.bitrate Bitrate (i.e. size) of MP3 file in kBit/s. Allowed bitrates are: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256 and 320.
format.mp3.bCopyright If this is set to TRUE the Copyright bit in the MP3 stream will be set.
format.mp3.bCRC Set this to TRUE in order to enable CRC-checksum in the bitstream.
format.mp3.bOriginal If this is set to TRUE the Original bit in the MP3 stream will be set.
format.mp3.bPrivate If this is set to TRUE the Private bit in the MP3 stream will be set.
The LHV1 BE_CONFIG - structure (recommended)
These are the members of the LHV1 BE_CONFIG structure, you need to fill in before you call beInitStream():
dwConfig Specifies what kind of output you want. Since only MP3 currently is supported you must set this to BE_CONFIG_LAME
format.LHV1.dwStructVersion Indicates the version number of the structure, current version number is 1
format.LHV1.dwStructSize Specifies the size of the BE_CONFIG structure (currently 331 bytes)
format.LHV1.dwSampleRate Samplerate in Hz for MP3 file. This can be set to either:
32000, 44100 or 48000 for MPEG-I
16000, 22050 or 24000 for MPEG-I
8000, 11025 or 12000 for MPEG-II.5
format.LHV1.dwReSampleRate Specifies to which sample rate the input stream has to be resampled, if set to 0, the encoder will decide which ReSample rate to use
format.LHV1.nMode Stereomode for MP3 file. This can be either BE_MP3_MODE_STEREO, BE_MP3_MODE_JSTEREO, BE_MP3_MODE_DUALCHANNEL or BE_MP3_MODE_MONO.
format.LHV1.dwBitrate For CBR, this specifies the actual bitrate, for VBR, it specifies the minimum bitrate
Allowed bitrates are: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256 and 320.for MPEG-I
Allowed bitrates are: 8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 144 and 160.for MPEG-II
Note: dwBitrate is used as the minimum bitrate in the case of using a VBR mode.
format.LHV1.dwMaxBitrate When VBR mode is enabled, it specifies the maximum allowed bitrate (see also dwBitrate to specify the minium bitrate), for CBR mode this setting is ignored.
format.LHV1.nPreset Keep in mind that the presets can overwrite some of the other settings, since it is called right before the encoder is initialized
The nPreset option can be set to one of the following presets values::
LQP_NOPRESET (don't use any presets)
LQP_NORMAL_QUALITY (quality is set to 5)
LQP_LOW_QUALITY (quality is set to 9)
LQP_HIGH_QUALITY (quality is set to 2)
LQP_VOICE_QUALITY (use for voice encoding)
LQP_R3MIX (r3mix preset option)
LQP_VERYHIGH_QUALITY (quality is set to 0)
LQP_STANDARD (lame command line alt-preset standard)
LQP_FAST_STANDARD (lame command line alt-preset fast standard)
LQP_EXTREME (lame command line alt-preset extreme)
LQP_FAST_EXTREME (lame command line alt-preset fast extreme)
LQP_INSANE (lame command line alt-preset insane)
LQP_ABR (lame command line alt-preset abr)
LQP_CBR(lame command line alt-preset cbr)
(old lame preset options)
LQP_PHONE
LQP_SW
LQP_AM
LQP_FM
LQP_VOICE
LQP_RADIO
LQP_TAPE
LQP_HIFI
LQP_CD
LQP_STUDIO
format.LHV1.bCopyright If this is set to TRUE the Copyright bit in the MP3 stream will be set.
format.LHV1.bCRC Set this to TRUE in order to enable CRC-checksum in the bitstream.
format.LHV1.bOriginal If this is set to TRUE the Original bit in the MP3 stream will be set.
format.LHV1.bPrivate If this is set to TRUE the Private bit in the MP3 stream will be set.
format.LHV1.nVbrMethod Sepecifes if the VBR method to use, currently the following settings are supported:
VBR_METHOD_NONE (don't use VBR, use CBR encoding instead),
VBR_METHOD_DEFAULT (default VBR method)
VBR_METHOD_OLD (old VBR method, proven to be reliable)
VBR_METHOD_NEW (new VBR method, faster than VBR_METHOD_OLD)
VBR_METHOD_MTRH (depreciated, same as VBR_METHOD_NEW)
VBR_METHOD_ABR (Average Bitrate Encoding, see also format.LHV1.dwVbrAbr_bps)
format.LHV1.bWriteVBRHeader Sepecifes if the a XING VBR header should be written or not. When this option is enabled, you have to call the beWriteVBRHeader function when encoding has been completed. Keep in mind that the VBR info tag can also be written for CBR encoded files, the TAG info can be useful for additional info like encoder delay and the like.
format.LHV1.bEnableVBR Specifies if VBR encoding option shall be used or not, possible values are TRUE/FALSE
format.LHV1.nVBRQuality Quality option if VBR is enabled (0=highest quality, 9 is lowest quality)
format.LHV1.dwVbrAbr_bps If the Average Bit Rate is specified, the lame encoder ignores the nVBRQuality settings (However, bEnableVBR must be set to TRUE and the format.LHV1.nVbrMethod parameter should be set to VBR_METHOD_ABR). The allowed range for the format.LHV1.dwVbrAbr_bps parameter any integer value between:
MPEG-I: 32000 .. 320000 bps
MPEG-II: 8000 .. 160000 bps
format.LHV1.bNoBitRes Disables the bit-resorvoir and disables the insertion of padded frames
format.LHV1.nQuality Quality Setting, HIGH BYTE should be NOT LOW byte, otherwhise quality is set to 5. This isdo
ne to be backward compatible. So to set quality to 3, you have to set the nQuality parameter to 0xFC03.
format.mp3.btReserved For future use, set all elements to zero
--------------------------------------------------------------------------------
beInitStream()
Synopsis: BE_ERR beInitStream( PBE_CONFIG pbeConfig, PDWORD dwSamples, PDWORD dwBufferSize, PHBE_STREAM phbeStream )
Parameters: pbeConfig Pointer at the struct containing encoder settings.
dwSamples Pointer atdo
uble word where number of samples to send to each beEncodeChunk() is returned.
dwBufferSize Pointer atdo
uble word where minimum size in bytes of output buffer is returned.
phbeStream Pointer at integer where Stream handle is returned.
Description: This function is the first to call before starting an encoding stream.
--------------------------------------------------------------------------------
beEncodeChunk()
Synopsis: BE_ERR beEncodeChunk( HBE_STREAM hbeStream, DWORD nSamples, PSHORT pSamples, PBYTE pOutput, PDWORD pdwOutput )
Parameters: hbeStream Handle of the stream.
nSamples Number of samples to be encoded for this call. This should be identical to what is returned by beInitStream(), unless you are encoding the last chunk, which might be smaller.
pSamples Pointer at the 16-bit signed samples to be encoded. These should be in stereo when encoding a stereo MP3 and mono when encoding a mono MP3.
pOutput Where to write the encoded data. This buffer should be at least of the minimum size returned by beInitStream().
pdwOutput Where to return number of bytes of encoded data written. The amount of data written might vary from chunk to chunk.
Description: Encodes a chunk of samples. Please note that if you have set the output to generate mono MP3 files you must feed beEncodeChunk() with mono samples!
--------------------------------------------------------------------------------
beDeinitStream()
Synopsis: BE_ERR beDeinitStream( HBE_STREAM hbeStream, PBYTE pOutput, PDWORD pdwOutput )
Parameters: hbeStream Handle of the stream.
pOutput Where to write the encoded data. This buffer should be at least of the minimum size returned by beInitStream().
pdwOutput Where to return number of bytes of encoded data written.
Description: This function should be called after encoding the last chunk in order to flush the encoder. It writes any encoded data that still might be left inside the encoder to the output buffer. This function should NOT be called unless you have encoded all of the chunks in your stream.
--------------------------------------------------------------------------------
beCloseStream()
Synopsis: BE_ERR beCloseStream( HBE_STREAM hbeStream )
Parameters: hbeStream Handle of the stream.
Description: Last function to be called when finished encoding a stream. Should unlike beDeinitStream() also be called if the encoding is canceled.
--------------------------------------------------------------------------------
beVersion()
Synopsis: VOID beVersion( PBE_VERSION pbeVersion )
Parameters: pbeVersion Pointer at struct where version number, release date and URL for homepage is returned.
Description: Returns information like version numbers (both of the DLL and encoding engine), release date and URL for lame_enc's homepage. All this information should be made available to the user of your product through a dialog box or something similar.
--------------------------------------------------------------------------------
beWriteVBRHeader()
Synopsis: VOID beWriteVBRHeader( LPCSTR pszMP3FileName )
Parameters: pszMP3FileName Const Pointer zero terminated string, that contains the MP3 file name.
Description: Writes a Xing Header in front of the MP3 file. Make sure that the MP3 file is closed, and the the beConfig.format.LHV1.bWriteVBRHeader has been set to TRUE. In addition, it is always save to call beWriteVBRHeader after the encoding has been finished, even when the beConfig.format.LHV1.bWriteVBRHeader is not set to TRUE
--------------------------------------------------------------------------------
Lame_enc.dll debug option
The lame_enc.dll has a built-in debug option, that dumps all the important internal settings to a text file. To enable this feature, create a text file in the Windows directory which is named lame_enc.ini, and should contain the following two lines
[debug]
WriteLogFile=1
Save this text file, and each time you encode a file, the settings are added to a file name lame_enc.txt, that is located in the same directory as the lame_enc.dll
江
江南大米
Unregistered / Unconfirmed
GUEST, unregistred user!
beInitStream()
beDeinitStream()
beEncodeChunk()
beCloseStream()
beWriteVBRHeader()
主要就这几个函数了！
beDeinitStream()
beEncodeChunk()
beCloseStream()
beWriteVBRHeader()
主要就这几个函数了！
A
AndyStone
Unregistered / Unconfirmed
GUEST, unregistred user!
大哥，怎么可以在Delphi中使用？可否给我一个源代码？
江
江南大米
Unregistered / Unconfirmed
GUEST, unregistred user!
只有C（包括VC）的源码，你要不？
留mail啊！
留mail啊！
江
江南大米
Unregistered / Unconfirmed
GUEST, unregistred user!
啊呕算了，不要mail了！我找到那个地址了！
http://sourceforge.net/project/showfiles.php?group_id=290&package_id=309&release_id=204688
http://sourceforge.net/project/showfiles.php?group_id=290&package_id=309&release_id=204688
Similar threads
- 回复
- 4
- 查看
- 4K