tonvy,在命令行下运行setup命令
┌───┤ Choose a Tool ├────┐
│ │
│ Authen
tication configuration │
│ Firewall configuration │
│ Keyboard configuration │
│ Mouse configuration │
│ Network configuration │
│ Printer configuration │
│ System services │
│ Timezone configuration │
│ X configuration │
│ │
│ ┌─────┐ ┌───┐ │
│ │ Run Tool │ │ Quit │ │
│ └─────┘ └───┘ │
└─────────────────┘
选择“X configuration”按下“Run Tool”
┌────────────┤ Welcome ├─────────────┐
│ │
│ This program will create a basic XF86Config file, based on │
│ menu selections you make. │
│ │
│ The XF86Config file usually resides in /usr/X11R6/lib/X11 or │
│ /etc/X11. A sample XF86Config file is supplied with XFree86;
│
│ it is configured for a standard VGA card and monitor with │
│ 640x480 resolution. │
│ │
│ You can either take the sample XF86Config as a base and edit │
│ it for your configuration, or let this program produce a base │
│ XF86Config file for your configuration and fine-tune it. Refer │
│ to /usr/X11R6/lib/X11/doc/README.Config for a detailed │
│ │
│ ┌──┐ ┌────┐ │
│ │ Ok │ │ Cancel │ │
│ └──┘ └────┘ │
│ │
│ │
└────────────────────────────────┘
选"ok"后会自动检测你的显卡，看看型号是否正确。ok后会让你选显示器“Monitor”型号。然后是选择显存大小，接着是“ Clockchip Configuration ”选择“No Clockchip Setting (recommended) ”这个项目（一般都是这个）。然后是“Select Video Mode”，你自己选择合适的值，比如我是16 bit:"1024x768"，ok后会问你是否测试，你就测试一下，如果显示不正常可以用“ctrl+alt+退格键”组合键,回到文本配置界面，重复选择“Select Video Mode”，直到正常显示，然后存盘！ Good lucky 4 U ！
-----------------------------
linux 问题推荐你到
www.linuxfans.org
www.linuxsir.com
www.linuxforum.net
提问！（我ID都是“会游泳的鱼”）
