自己改成delphi的吧。
The article explains the steps neccessary to programmatically query and set
the proxy setting information for Internet Explorer.
Under Internet Explorer 4.x and earlier, the InternetSetOption and
InternetQueryOption APIs are used with the INTERNET_OPTION_PROXY flag.
While this option will still work under Internet Explorer 5, multiple
connection options have been introduced in the new version. Given this,
the INTERNET_OPTION_PROXY flag will return only the "static" proxy server
setting. The static option is the proxy server information stored under
the HKEY_CURRENT_USER hive much the same way it was under Internet Explorer 4.0
NOTE: INTERNET_OPTION_PROXY does not permanently change the settings. It
does this for the current process only when a NULL handle is used. However,
it can also change the settings on a per session basis if a valid session
handle is sent in (session handles are obtained using the InternetOpen() API).
If under Internet Explorer 5, you specified a different connection option
(such as a dial up connection) as the default, it possible that the proxy
information you obtain using the INTERNET_OPTION_PROXY flag may be incorrect
for the current Internet Explorer session. For this reason, under Internet
Explorer 5, it is recommended that the INTERNET_OPTION_PER_CONNECTION_OPTION
be used instead.
NOTE: INTERNET_OPTION_PER_CONNECTION_OPTION causes the settings to be changed
on a system-wide basis when a NULL handle is used. To correctly reflect global
proxy settings, you must call the InternetSetOption function with the
INTERNET_OPTION_REFRESH option flag. Or, to set the settings on a per session
basis, a valid session handle can be used.
MORE INFORMATION
Under Internet Explorer 4.x, a typical mechanism to query the proxy
information would look something like this:
unsigned long nSize = 4096;
char szBuf[4096] = { 0 };
INTERNET_PROXY_INFO* pInfo = (INTERNET_PROXY_INFO*)szBuf;
if(!InternetQueryOption(NULL, INTERNET_OPTION_PROXY, pInfo, &nSize))
printf("InternetQueryOption failed! (%d)/n", GetLastError())
Under Internet Explorer 5, the recommended way is to use code similar to below:
INTERNET_PER_CONN_OPTION_LIST List;
INTERNET_PER_CONN_OPTION Option[5];
unsigned long nSize = sizeof(INTERNET_PER_CONN_OPTION_LIST);
Option[0].dwOption = INTERNET_PER_CONN_AUTOCONFIG_URL;
Option[1].dwOption = INTERNET_PER_CONN_AUTODISCOVERY_FLAGS;
Option[2].dwOption = INTERNET_PER_CONN_FLAGS;
Option[3].dwOption = INTERNET_PER_CONN_PROXY_BYPASS;
Option[4].dwOption = INTERNET_PER_CONN_PROXY_SERVER;
List.dwSize = sizeof(INTERNET_PER_CONN_OPTION_LIST);
List.pszConnection = NULL;
List.dwOptionCount = 5;
List.dwOptionError = 0;
List.pOptions = Option;
if(!InternetQueryOption(NULL, INTERNET_OPTION_PER_CONNECTION_OPTION, &List, &nSize))
printf("InternetQueryOption failed! (%d)/n", GetLastError());
if(Option[0].Value.pszValue != NULL)
printf("%s/n", Option[0].Value.pszValue);
if((Option[2].Value.dwValue &
PROXY_TYPE_AUTO_PROXY_URL) == PROXY_TYPE_AUTO_PROXY_URL)
printf("PROXY_TYPE_AUTO_PROXY_URL/n");
if((Option[2].Value.dwValue &
PROXY_TYPE_AUTO_DETECT) == PROXY_TYPE_AUTO_DETECT)
printf("PROXY_TYPE_AUTO_DETECT/n");
INTERNET_VERSION_INFO Version;
nSize = sizeof(INTERNET_VERSION_INFO);
InternetQueryOption(NULL, INTERNET_OPTION_VERSION, &Version, &nSize);
if(Option[0].Value.pszValue != NULL)
GlobalFree(Option[0].Value.pszValue);
if(Option[3].Value.pszValue != NULL)
GlobalFree(Option[3].Value.pszValue);
if(Option[4].Value.pszValue != NULL)
GlobalFree(Option[4].Value.pszValue)
The code above specifies the connection by setting the pszConnection string in the INTERNET_PER_CONN_OPTION_LIST structure. By setting this string to NULL, the configuration information will be retrieved for the default (or LAN) settings.
The first option (Option[0] INTERNET_PER_CONN_AUTOCONFIG_URL) will return the URL specified for auto configuration of the proxy server. The second option (Option[1] INTERNET_PER_CONN_AUTODISCOVERY_FLAG) will detect whether the auto detect option is enabled or not for the connection specified. The third option will determine what combination of flags have been set for this particular connection. The last two options correspond to the same information as retrieved whe INTERNET_OPTION_PROXY was used in Internet Explorer 4.x.
As you also see, the options that can potentially return string values are freed using GlobalFree(). This is because the string buffers are allocated for you by the WININET library, and it's up to the programmer to free up the buffer after using it.
To obtain information for a different connection, simply change the List.pszConnection string to point to the Dial-Up setting entry you're interested it.
Similarly, to set proxy information, you would use the same technique but with InternetSetOption() instead, for example:
INTERNET_PER_CONN_OPTION_LIST List;
INTERNET_PER_CONN_OPTION Option[1];
unsigned long nSize = sizeof(INTERNET_PER_CONN_OPTION_LIST);
Option[0].dwOption = INTERNET_PER_CONN_PROXY_SERVER;
Option[0].Value.pszValue = "http://myproxy:8080";
List.dwSize = sizeof(INTERNET_PER_CONN_OPTION_LIST);
List.pszConnection = NULL;
List.dwOptionCount = 1;
List.dwOptionError = 0;
List.pOptions = Option;
if(!InternetSetOption(NULL, INTERNET_OPTION_PER_CONNECTION_OPTION, &List, nSize))
printf("InternetQueryOption failed! (%d)/n", GetLastError());
Once again, the above sample will change the default (or LAN) settings (List.pszConnection == NULL). In the sample, the "static" proxy server information is changed to "http://myproxy" at port 8080. Similarly you can also change the auto configuration URL:
INTERNET_PER_CONN_OPTION_LIST List;
INTERNET_PER_CONN_OPTION Option[2];
unsigned long nSize = sizeof(INTERNET_PER_CONN_OPTION_LIST);
Option[0].dwOption = INTERNET_PER_CONN_AUTOCONFIG_URL;
Option[0].Value.pszValue = "http://myserver/get_proxy_info.dll";
Option[1].dwOption = INTERNET_PER_CONN_FLAGS;
Option[1].Value.dwValue = PROXY_TYPE_AUTO_PROXY_URL;
List.dwSize = sizeof(INTERNET_PER_CONN_OPTION_LIST);
List.pszConnection = NULL;
List.dwOptionCount = 2;
List.dwOptionError = 0;
List.pOptions = Option;
if(!InternetSetOption(NULL, INTERNET_OPTION_PER_CONNECTION_OPTION, &List, nSize))
printf("InternetQueryOption failed! (%d)/n", GetLastError())
When you configure Internet Explorer to use a proxy server for HTTP and go direct for other protocols, use the code to follow.
NOTE: The buffer that is passed to INTERNET_PER_CONN_PROXY_SERVER has the settings for each protocol (this code sets only HTTP, and all other protocols use direct connection).
NOTE: The INTERNET_PER_CONN_FLAGS sets the value for both Proxy types (direct and through proxy) in one element of the Option List Array, as shown below in the code.
NOTE: You have to OR these flags in one place. If you place these flags in another List element, they will display correctly (Internet Explorer OPTIONS), but only one of the flags (the first that is set) will work.
int main(int argc, char * argv[])
{
char buff[256] = "http=http://itgproxy:80"
// To include server for FTP, HTTPS, and so on, use the string
// (ftp=http://itgproxy:80
https=https://itgproxy:80)
INTERNET_PER_CONN_OPTION_LIST List
INTERNET_PER_CONN_OPTION Option[3]
unsigned long nSize = sizeof(INTERNET_PER_CONN_OPTION_LIST)
Option[0].dwOption = INTERNET_PER_CONN_PROXY_SERVER
Option[0].Value.pszValue = buff
Option[1].dwOption = INTERNET_PER_CONN_FLAGS
Option[1].Value.dwValue = PROXY_TYPE_PROXY
Option[1].Value.dwValue |= PROXY_TYPE_DIRECT
// This option sets all the possible connection types for the client.
// This case specifies that the proxy can be used or direct connection is possible.
Option[2].dwOption = INTERNET_PER_CONN_PROXY_BYPASS
Option[2].Value.pszValue = "<local>"
List.dwSize = sizeof(INTERNET_PER_CONN_OPTION_LIST)
List.pszConnection = NULL
List.dwOptionCount = 3
List.dwOptionError = 0
List.pOptions = Option
if(!InternetSetOption(NULL, INTERNET_OPTION_PER_CONNECTION_OPTION, &List, nSize))
printf("InternetSetOption failed! (%d)/n", GetLastError())
InternetSetOption(NULL, INTERNET_OPTION_REFRESH, NULL,NULL)
//The connection settings for other instances of Internet Explorer.
return 0
}
In the sample above (again the default or LAN setting), you have to specify
the auto proxy configuration URL and set the option flag to enable the auto
proxy configuration.